I am trying to add a couple of files to the home directory in knoppix that I use frequently. I have tried using the injection plugin to inject my home.tar.gz which contains the two files, but they do not get injected. I have also tried using persistence with knoppix using the persistence_ext4_4GB_casper-rw.dat I downloaded from your source, but it doesn't work either. 

Both plugins show okay in debug.

Has anyone succeeded in getting Knoppix to boot in UEFI mode? If so did you have to do anything special to get it to work? I have tried Knoppix 8.6 and 8.6.1, and it will not boot in UEFI on any computer I have tried it on. It only boots to a black screen with static (non-flashing cursor)

Hello,

I have a HP laptop with the following specs:

Intel Core i5-1035G1
16GB DDR4-2666 RAM
512TB NVME drive
1TB SATA SSD


That I got the error:

Selected Boot device did not Authenticate. Press <Enter> to Continue.

I took the picture on 7-23-2020, and just re-verified the same ventoy-1.0.18

Picture attached

Thank you

No Auto Installation menu choice, what am I not doing or doing wrong?
Any help would be appreciated 

Volume in drive G is Ventoy
Volume Serial Number is 4E21-0000

Directory of G:\

08/03/2020  06:35 PM    <DIR>          ISO
08/03/2020  06:36 PM    <DIR>          ventoy

Directory of G:\ISO

08/03/2020  06:35 PM    <DIR>          .
08/03/2020  06:35 PM    <DIR>          ..
07/24/2020  09:04 AM    4,197,056,512 Windows_10_64.iso
              1 File(s)  4,197,056,512 bytes

Directory of G:\ventoy

08/03/2020  06:36 PM    <DIR>          .
08/03/2020  06:36 PM    <DIR>          ..
07/26/2020  07:34 PM              188 ventoy.json
08/03/2020  06:36 PM    <DIR>          script
              1 File(s)            188 bytes

Directory of G:\ventoy\script

08/03/2020  06:36 PM    <DIR>          .
08/03/2020  06:36 PM    <DIR>          ..
05/11/2020  06:10 AM            7,618 autounattendmbr.xml
07/26/2020  10:46 AM            7,009 autounattendUEFI.xml
              2 File(s)        14,627 bytes

my ventoy.json file that passed F5-debug and passes Json Parser Online

{ "auto_install" : [
        {
            "image": "/ISO/windows_10_64.iso",
            "template": [
"/ventoy/script/autounattendmbr.xml",
"/ventoy/script/autounattendUEFI.xml"]}]}


Thanks in advance
Robert

老大   DELL C6100  无法从工具盘启动   可以解决下不？

Attached Files

Thumbnail(s)
   

Hello
I just downloaded the latest 64 bit version of windows10 from May from the microsoft download site.

I check the checksum. Its good.

No problem to put in the EXFAT partition.
I boot perfectly with a computer in Legacy mode. The start of the boot is going well. But it is totally impossible to install windows because a driver is missing ...
See this picture https://filestore.community.support.micr...a6cc5dbe75 in an old discussion https://answers.microsoft.com/en-us/wind...90a1604855
I did with the French iso then the international iso in English.

I suspect the missing driver is either the one that accesses the EXFAT partition or the FAT16 partition because when I use another build tool, the installation can be done in a completely normal fashion.

I'm going to give it a try by turning the fat16 partition into fat32.

Do you know this problem?

I tested live ALT Linux Workstation 9.1 x86_64 (2020-08-05) with ventoy-1.0.18.
ISO: alt-workstation-9.1-x86_64.iso (4.7GB)
DistroWatch info: info
Download: download
Boot:
- Legacy (MBR)
- UEFI (Secure Boot disabled)
Platforms test:
- processor: Intel i5-2410M (Sandy Bridge)  laptop: Packard Bell EN TS1HR
- processor: Intel i5-5200U (Broadwell) laptop: Lenovo Z51-70

Attached Files

Thumbnail(s)
           

I tested live linux BEE free 20.04 2020-08-01 (based on Ubuntu) with ventoy-1.0.18.
ISO: BEE-free-20.04-2020-08-01.iso (3.4 GB)
Download: download
DistroWatch info: info
Site: site
Boot:
- Legacy (MBR)
- UEFI (Secure Boot disabled)
Platforms test:
- processor: Intel i5-2410M (Sandy Bridge)  laptop: Packard Bell EN TS1HR
- processor: Intel i5-5200U (Broadwell) laptop: Lenovo Z51-70

Attached Files

Thumbnail(s)
   

Hi,

I love ventoy.
But there's a problem I have.

I made an Multiboot-USB Stick. With ventoy so easy.
But if I edit an ISO the error: "No bootfile found for UEFI! Maybe the image does not support X64 UEFI!" occured.

In this case it's Acronis 2019.
Inside iso is a file for Mac: AcronisTrueImage2019-17000.dmg
I delete this one to safe space. Now I bood end get the error.

Kaspersky rescue disc the same.

But I did the same thing with Acronis 2017 ago... this worked fine.

I use PowerISO or UltraIso to edit the isos.

Can someone help me with this?

Best regards

I've installed Ventoy onto two different USB drives and both fail to boot on an i386.  I get "GR" in the upper left corner, then an error message about an invalid file system, and then it dumps me into a GRUB recovery command prompt.  The USB drives were 16 GB and 2 GB.  Both written successfully with the Windows version of the installer.

I was able to get the drives to boot on a newer x64 system and everything appeared to work properly there.  I was building the USB drive to stick some utilities on, like Clonezilla and DBAN, so it's not super-critical for it to work on "antique" hardware.  It didn't work and I'm trying to understand why.  I read the documentation pretty carefully and didn't see anything that indicated it wouldn't work on x32.

Thanks for any clarification...