Hi,
the HD in my Toshiba Stellite Pro with Win10 and Fedora32 doesn't boot F32 anymore I want to use SytemRescueCD to try some recovery but cannot boot it from Ventoy (V 1.0.34  with -s and SR 6.1.7).

If UEFI is enabled I get:
no bootfile found for UEFI
maybe then image does not suppotrt X64 UEFI

If UEFI is disabled SR (with default options) starts but after some errors on ata1 (expected the HD has problems)
it stops with:
mounting /dev/disk/by-label/SYSRCD617 
waiting 30 sec ...
ERROR device /dev... did not show up

and drop to a shell. The dir /dev/disk/by-label has no SRCD.. file, only
Recovery System T131360000B VTOYEFI Ventoy

I also used a Fedora Live iso but when I try "Start Fedora Live" it just sit there with a flashing cursor in the top left.

Any advice?

GiP

I testel live JingOS v0.6 x86 on Ventoy-1.034.
ISO: JingOS-V0.6.iso (2.5GB)  >> The default username: jingos, password/pin: 123456
Download:
direct download 
download site [EN/Chinese version] - Release & Download
Info (additional info): info
Boot: UEFI (Secure Boot > Disabled). Legacy - not work
Platform: Lenovo Z51-70 Intel i5-5200U

Attached Files

Thumbnail(s)
           

linuxmint-20-cinnamon-64bit with persistence works absolutely ok

have tested with success linuxfx-10.7.105-founders-plasma only in live version without persistence

Hi,

Great job on Ventoy! It is a great utility and works wonderfully well.

Be aware of a potential issue with naming lists of images that are permitted "white-lists," and those that are not permitted "black-lists." This legacy naming convention has been raised by certain community activists as insensitive to certain ethnic and racially identified groups.

A common workaround is to refer to "allow-lists" in place of "white-lists," and "block-lists" in place of "black-lists".

Best regards.

I tested live Garuda Linux XFCE 210107 Serpent Eagle (based on Arch Linux) with Ventoy 1.0.33.
ISO: garuda-xfce-linux-tkg-bmq-210107.iso (2.5GB)
Download: download
Boot: Legacy mode/MBR
Platform: Lenovo Z1-70 i5-5200U

Attached Files

Thumbnail(s)
       

I tested live Redcore Linux Hardened 2101 on Ventoy-1.0.33.
ISO: Redcore.Linux.Hardened.2101.KDE.amd64.BETA.iso (3.4GB)
Download: https://redcorelinux.org/download ,
Boot: Legacy mode/MBR
Platform: Lenovo Z1-70 i5-5200U

Attached Files

Thumbnail(s)
       

I tested live Diamond LinuxTT 15.12.20 (based on Debian) on Ventoy-1.0.33
ISO: LinuxTT_GM5p_amd64_r3_15.12.20.iso (2.6GB)
Download: download
Boot: Legacy mode/MBR
Platform: Lenovo Z1-70

Attached Files

Thumbnail(s)
       

I tested live Solus 4.2 Budgie Linux on Ventoy-1.0.33.
ISO: Solus-4.2-Budgie.iso (1,8GB)
Download ISO: download ISO's
Home site: home site
Boot: Legacy mode/MBR
Platform: Lenovo Z1-70 i5-5200U

Attached Files

Thumbnail(s)
       

I tested WinPE10 8 Sergei Strelec x86 x64 2021.01.05 English with Ventoy-1.0.33/1.0.34.
ISO: WinPE10_8_Sergei_Strelec_x86_x64_2021.01.05_English.ISO (4GB)
Download (EN/RU): Home site
Boot: Legacy/MBR, UEFI64 (Secure Boot > Disabled)
Platform: Lenovo Z1-70 i5-5200U AMD graphic
Info: Strelec works on Windows 7x64.

Note (problems encountered etc.):
1.0.33:
- I copy only ISO to USB - boot not run (start menu Strelec is black - pic. 4).
Boot: MBR/Legacy - work. UEFI: not work (ISO boot ok and Strelec not start)
- I copy ISO and extract SSTR folder from ISO into Ventoy USB root directory (pic. 3) and after booting all programs and options is complete.
Tested: Win10 x64/Win10 x86/Win8 x86
Boot: MBR/Legacy - work. UEFI: not work (ISO boot ok and Strelec not start)
1.0.34:
- I copy only ISO to USB and work ok - after booting all programs and options is complete.
Tested: Win10 x64/Win10 x86/Win8 x86
Boot: MBR/Legacy - work. UEFI: not work (ISO boot ok and Strelec not start)
- I copy ISO and extract SSTR folder from ISO into Ventoy USB root directory (see picture 3) and after booting all programs and options is complete.
Tested: Win10 x64/Win10 x86/Win8 x86
Boot: MBR/Legacy - work. UEFI boot: work (only Win10 x64).

Attached Files

Thumbnail(s)