Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 Image Path empty?
#1
I'm tryting to get started with iVentoy, (familiar with Ventoy and PXE in general) but I do fail PXE booting using a basic config with only one (tried a second) image:

Is it correct that the image path can be empty or "."?

Code:
iPXE 1.0.0+ -- Open Source Network Boot Firmware -- https://ipxe.org
Features: DNS HTTP iSCSI TFTP VLAN SRP AoE EFI Menu
net11: 50:7c:6f:3d:b2:43 using i350 on 0000:6c:00.3 (Ethernet) [open]
  [Link:up, TX:0 TXE:1 RX:0 RXE:0]
  [TXE: 1 x "Network unreachable (https://ipxe.org/28086090)"]
Configuring (net11 50:7c:6f:3d:b2:43)...... ok
net11: 192.168.223.200/255.255.255.0 gw 192.168.223.1
net11: fe80::527c:6fff:fe3d:b243/64
Next server: 192.168.223.3
Filename: http://192.168.223.3:16000/ipxe/01-50-7c-6f-3d-b2-43
http://192.168.223.3:16000/ipxe/01-50-7c-6f-3d-b2-43... ok
DxeTpm2MeasureBootHandler: PeCoffLoaderGetImageInfo failed! Status = Unsupported
Image path:
"".
01-50-7c-6f-3d-b2-43 : 2749 bytes [script]
http://192.168.223.3:16000/tarfs/loader/logo_1024x768.png... ok
DxeTpm2MeasureBootHandler: PeCoffLoaderGetImageInfo failed! Status = Unsupported
Image path:
"".

The machine PXE-boots ok from a "normal" PXE server via TFTP.

Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)