Solved Disk not found error in format section

[fesli]

What about X:\windows\system32\ventoy\vtoype.log

hi as in the picture

I mean you run 

Code:

type X:\windows\system32\ventoy\vtoype.log

type cmd will show the content of the file.

This process cannot access the file because the file is being used by another process.

[fesli]

http start 200 also sees the disk (Oracle VM VirtualBox)

Boot image file in [manual mode] (real machine) does not see the disk

[Janro]

I am getting the same error on multiple PCs when installing windows 10 in UEFI. It is a working ISO (tested many times). Only works in Legacy.

vtoype.log
----------------------

X:\windows\system32>REM ========== VTOY PE INIT =============

X:\windows\system32>set Drive=Y

X:\windows\system32>set URL=http://192.168.0.73:16000/riso/id/12.iso

X:\windows\system32>wpeinit

X:\windows\system32>netcfg.exe -winpe
Trying to install ms_tcpip6 ...


... done.


Trying to install ms_netbios ...


... done.


Trying to install ms_msclient ...


... done.


Trying to install ms_tcpip ...


... done.



X:\windows\system32>wpeutil InitializeNetwork


The command completed successfully.


X:\windows\system32>X:\windows\System32\ventoy\httpdisk.exe /mount 0 http://192.168.0.73:16000/riso/id/12.iso /cd Y:
HttpDisk: The network location cannot be reached. For information about network troubleshooting, see Windows Help.


X:\windows\system32>if exist Y: (echo httpdisk mount OK )  else (echo httpdisk mount FAILED )
httpdisk mount FAILED

-------------------------

ventoy.log
-------------
[2023/07/10 15:50:58.598] [440] ######## VentoyJump 64bit ##########
[2023/07/10 15:50:58.598] [440] Current directory is <X:\windows\system32>
[2023/07/10 15:50:58.598] [440] EXE path: <X:\windows\system32\winpeshl.exe> dir:<X:\windows\system32> name:<winpeshl.exe>
[2023/07/10 15:50:58.598] [440] File <winpeshl.exe> exist
[2023/07/10 15:50:58.598] [440] ReadWholeFile2Buf <winpeshl.exe>
[2023/07/10 15:50:58.598] [440] Success read file size:1153776
[2023/07/10 15:50:58.598] [440] VentoyJump 64bit
[2023/07/10 15:50:58.598] [440] ventoy directory not exist, now create it.
[2023/07/10 15:50:58.598] [440] Find os pararm at 188416
[2023/07/10 15:50:58.598] [440] szMagic=<IVENTOY>
[2023/07/10 15:50:58.598] [440] szISOPath=<Win10_22H2_x64.iso>
[2023/07/10 15:50:58.598] [440] szPathMD5=<db1b25d721de47fa36cd5b6b14e58ea5>
[2023/07/10 15:50:58.598] [440] szSystemId=<                                >
[2023/07/10 15:50:58.598] [440] szVolumeId=<CD_ROM                          >
[2023/07/10 15:50:58.614] [440] uiImgID=<12>
[2023/07/10 15:50:58.614] [440] ui64ImgBytes=<4769503232>
[2023/07/10 15:50:58.614] [440] aucDevMAC=<20-47-47-ea-61-3c>
[2023/07/10 15:50:58.614] [440] usAutoID=<0>
[2023/07/10 15:50:58.614] [440] usNBDPort=<10809>
[2023/07/10 15:50:58.614] [440] usHttpPort=<16000>
[2023/07/10 15:50:58.614] [440] uiServerIP=<192.168.0.73>
[2023/07/10 15:50:58.614] [440] uiLocalIP=<192.168.0.200>
[2023/07/10 15:50:58.614] [440] uiMask=<255.255.255.0>
[2023/07/10 15:50:58.614] [440] uiGateWay=<192.168.0.100>
[2023/07/10 15:50:58.614] [440] uiDNS=<0.0.0.0>
[2023/07/10 15:50:58.614] [440] ucDHCPMode=<0>
[2023/07/10 15:50:58.614] [440] szBusInfo=<PCI:01:10:ec:81:36>
[2023/07/10 15:50:58.614] [440] official_windows=<1>
[2023/07/10 15:50:58.614] [440] windows11_bypass_check=<1>
[2023/07/10 15:50:58.614] [440] windows11_bypass_nro=<1>
[2023/07/10 15:50:58.614] [440] Exe type is <Windows 64>
[2023/07/10 15:50:58.614] [440] Magic data match OK
[2023/07/10 15:50:58.614] [440] ventoy directory already exist
[2023/07/10 15:50:58.614] [440] SaveBuffer2File <ventoy\iventoy_param> len:1024
[2023/07/10 15:50:58.614] [440] SaveBuffer2File <ventoy\wintool.tar.xz> len:930820
[2023/07/10 15:50:58.629] [440] SaveBuffer2File <ventoy\winpeshl.exe> len:33280
[2023/07/10 15:50:58.629] [440] ReadWholeFile2Buf <ventoy\wintool.tar.xz>
[2023/07/10 15:50:58.629] [440] Success read file size:930820
[2023/07/10 15:50:58.723] [440] Decompress success wintool.tar.xz(930820) ---> wintool.tar(2334720)
[2023/07/10 15:50:58.723] [440] SaveBuffer2File <ventoy\httpdisk.exe> len:131584
[2023/07/10 15:50:58.739] [440] SaveBuffer2File <ventoy\httpdisk.sys> len:52784
[2023/07/10 15:50:58.739] [440] SaveBuffer2File <ventoy\7za.exe> len:1152000
[2023/07/10 15:50:58.754] [440] SaveBuffer2File <ventoy\httpdisk_nosig.sys> len:49664
[2023/07/10 15:50:58.754] [440] SaveBuffer2File <ventoy\VTOYPE.BAT> len:305
[2023/07/10 15:50:58.754] [440] Create ca registry SUCCESS 0
[2023/07/10 15:50:58.754] [440] Load NT driver: X:\windows\system32\ventoy\httpdisk.sys httpdisk.sys
[2023/07/10 15:50:58.754] [440] OpenSCManager OK
[2023/07/10 15:50:58.754] [440] CreateService OK
[2023/07/10 15:50:58.754] [440] StartService OK
[2023/07/10 15:50:58.754] [440] Load NT driver success
[2023/07/10 15:50:58.754] [440] ProcessInjection start ...
[2023/07/10 15:50:58.754] [440] injection file not found.
[2023/07/10 15:50:58.754] [440] ProcessAutoIntall start ...
[2023/07/10 15:50:58.754] [440] auto install no need
[2023/07/10 15:50:58.754] [440] Do hook for official Windows ISO.
[2023/07/10 15:50:58.754] [440] Cmdline is (X:\windows\system32\ventoy\VTOYPE.BAT Y http://192.168.0.73:16000/riso/id/12.iso)
[2023/07/10 15:51:01.133] [440] WaitForSingleObject finished 0
[2023/07/10 15:51:01.133] [440] Windows11Bypass Check:1 NRO:1
[2023/07/10 15:51:01.133] [440] File <X:\setup.exe> exist
[2023/07/10 15:51:01.133] [440] Get file version for <X:\setup.exe>
[2023/07/10 15:51:01.133] [440] FileVersionze: <6 2 19041 1081>
[2023/07/10 15:51:01.133] [440] This is not Windows 11, not need to bypass 6.
[2023/07/10 15:51:01.133] [440] CmdLine:<ventoy\winpeshl.exe>
[2023/07/10 15:51:01.133] [440] Rejump to ventoy\winpeshl.exe
[2023/07/10 15:51:01.133] [440] Wait process... 1

[Gyppie77]

I also got similar problems. On some old ISOs i had, i was actually successful on mounting the ISO by running the httpdisk.exe manually. Then I downloaded and created new ISOs from uupdump.net but was not able to mount the ISO manually at all.

---

These are the logs from the ISO I got to mount manually. It differs a little bit in vtoype.log from the never ISOs

[longpanda]

[2023/07/11 22:10:04.584] [636] Create ca registry SUCCESS 0
[2023/07/11 22:10:04.584] [636] Load NT driver: X:\windows\system32\ventoy\httpdisk.sys httpdisk.sys
[2023/07/11 22:10:04.584] [636] OpenSCManager OK
[2023/07/11 22:10:04.584] [636] CreateService OK
[2023/07/11 22:10:04.584] [636] StartService error  2148204812
[2023/07/11 22:10:04.584] [636] Load NT driver failed
[2023/07/11 22:10:04.584] [636] Now try old sys file ...
[2023/07/11 22:10:04.584] [636] Load NT driver: X:\windows\system32\ventoy\httpdisk_nosig.sys httpdisk_nosig.sys
[2023/07/11 22:10:04.584] [636] OpenSCManager OK
[2023/07/11 22:10:04.584] [636] CreateService OK
[2023/07/11 22:10:04.584] [636] StartService error  577
[2023/07/11 22:10:04.584] [636] Load NT driver failed


httpdisk.exe need a driver httpdisk.sys to be installed.  So iVentoy will firstly install this driver. If the driver failed to install, then httpdisk.exe will not work.

[longpanda]

@Gyppie77 What ISO file did you test for your 1st log ? Can you share me for test?

[Gyppie77]

@Gyppie77  What ISO file did you test for your 1st log ?  Can you share me for test?

I used this one:

https://uupdump.net/selectlang.php?id=49...baebfa69a1

If needed, here is the link to the ISO I created:
19045.3208.230706-1207.22H2_RELEASE_SVC_PROD1_CLIENTPRO_OEMRET_X64FRE_EN-US.ISO - Google Disk

[Gyppie77]

Hi. Any progress to this problem?

[fesli]

Hi. Any progress to this problem?

No, unfortunately the problem persists.

[longpanda]

Try the latest 1.0.13 release.