Ventoy works on Synology NAS (at least w/ intel processors). Steps:
1 - you need to enable SSH on NAS
2 - login w/ admin
3 - go to the dir you unpacked tgz->tar->unpacked files
4 - execute ./iventoy.sh start
seems it is working. tested just the web interface hosted on NAS.
Update:
- Tested and working perfectly w/ UEFI and Legacy (Image tested: Memtest86)
- I needed to disable DHCP server on synology (for me didnt work config in iventoy the option: External DHCP, always got the error DHCP port is occupied by other program)
- As my synology was configured to PXE boot, i disabled it and disabled tftp server on synology
After that changes, i started iventoy on the Boot Information, and everything gone well. Now, i need to find why the External option on DHCP is not working for me, because i use my synology w/ a lot reserved ips
1 - you need to enable SSH on NAS
2 - login w/ admin
3 - go to the dir you unpacked tgz->tar->unpacked files
4 - execute ./iventoy.sh start
seems it is working. tested just the web interface hosted on NAS.
Update:
- Tested and working perfectly w/ UEFI and Legacy (Image tested: Memtest86)
- I needed to disable DHCP server on synology (for me didnt work config in iventoy the option: External DHCP, always got the error DHCP port is occupied by other program)
- As my synology was configured to PXE boot, i disabled it and disabled tftp server on synology
After that changes, i started iventoy on the Boot Information, and everything gone well. Now, i need to find why the External option on DHCP is not working for me, because i use my synology w/ a lot reserved ips