08-09-2021, 10:43 AM
Hello,
I wonder if this is a proper request.... but......
I have a very old but otherwise good motherboard, a MSI Neo-3 FR Rev.1 for the old Intel Q6600 CPU.
This board has a slight BIOS problem: It is booting from USB but some WinPE-USB-Sticks are booting terribly slow.
Examples that are booting slow are "Hirens Boot CD", latest and older "Sergej Strelec" DVDs, etc. - usually WinPE-stuff.
It seems that the BIOS is always switching to USB 1.1 and therefore booting the Strelec DVD takes 26 minutes.
ISOS that are booting fast (in normal USB 2.0 speed) are usually Linux isos, like, "porteus" (www.porteus.org).
But, I found a solution : First I am booting "plop boot manager" (www.plop.at) from one USB stick, then the plop boot manager is booting from USB from a second usb stick using his own code, and much faster.
I wonder if Ventoy could have an option like "always use USB 2 speed" and its own EHCI/UHCI boot stack so the ISOS would boot faster on my old machine.
Thanks for your help.
I wonder if this is a proper request.... but......
I have a very old but otherwise good motherboard, a MSI Neo-3 FR Rev.1 for the old Intel Q6600 CPU.
This board has a slight BIOS problem: It is booting from USB but some WinPE-USB-Sticks are booting terribly slow.
Examples that are booting slow are "Hirens Boot CD", latest and older "Sergej Strelec" DVDs, etc. - usually WinPE-stuff.
It seems that the BIOS is always switching to USB 1.1 and therefore booting the Strelec DVD takes 26 minutes.
ISOS that are booting fast (in normal USB 2.0 speed) are usually Linux isos, like, "porteus" (www.porteus.org).
But, I found a solution : First I am booting "plop boot manager" (www.plop.at) from one USB stick, then the plop boot manager is booting from USB from a second usb stick using his own code, and much faster.
I wonder if Ventoy could have an option like "always use USB 2 speed" and its own EHCI/UHCI boot stack so the ISOS would boot faster on my old machine.
Thanks for your help.