11-20-2020, 05:51 AM
1. To prevent misoperation, Ventoy2Disk.exe only lists USB drives by default.
You can run Ventoy2Disk.exe -U from CMD then all the disks will be listed. But at this time, you must be very careful and don’t choose the wrong disk.
2. I think you can disable some BIOS option about CSM to make your machine only support UEFI mode and test again.
You can run Ventoy2Disk.exe -U from CMD then all the disks will be listed. But at this time, you must be very careful and don’t choose the wrong disk.
2. I think you can disable some BIOS option about CSM to make your machine only support UEFI mode and test again.