Hi there.
Necessary conditions for Ventoy to work normally are (as stated at reboot.pro /topic/22277-ventoy-open-source-usb-boot-utility-for-both-bios-and-uefi/page-12#entry216140 and also at forums.ventoy.net/showthread.php?pid=1742#pid1742):
So, I took the time to thoroughly check my setup (see previous post) and confirmed that it abides all of them; I don't understand then why I'm getting the warning.
![[Image: sda1.png]](https://i.postimg.cc/BbXWb6KP/sda1.png)
There are just two minor differences from a standard Ventoy installation: partition 2 has been doubled for future proofing and there's an extra ext4 partition at '/dev/sda3' -- an addition allowed by the official documentation.
Please enlighten me if you can -- or at least give me a hint on how to disable (or reduce) the ten second delay...
Necessary conditions for Ventoy to work normally are (as stated at reboot.pro /topic/22277-ventoy-open-source-usb-boot-utility-for-both-bios-and-uefi/page-12#entry216140 and also at forums.ventoy.net/showthread.php?pid=1742#pid1742):
longpanda Wrote:1. There must be partition 1 and partition 2
2. ISO/WIM/VHD/IMG/EFI files must in partition1
3. Partition1's filesystem must FAT/exFAT/NTFS/UFS/XFS/Ext234
4. Partition1's cluster size must >= 2048
5. Partition2 must in FAT file system and hold all the Ventoy's directories and files as installed with Ventoy2Disk
So, I took the time to thoroughly check my setup (see previous post) and confirmed that it abides all of them; I don't understand then why I'm getting the warning.
There are just two minor differences from a standard Ventoy installation: partition 2 has been doubled for future proofing and there's an extra ext4 partition at '/dev/sda3' -- an addition allowed by the official documentation.
Quote:You can create Part3 and Part4 with the reserved space and use them as you want.
[@ https://www.ventoy.net/en/doc_disk_layout.html]
Please enlighten me if you can -- or at least give me a hint on how to disable (or reduce) the ten second delay...