Posts: 17
Threads: 4
Joined: Jan 2023
Reputation:
0
04-02-2024, 10:34 AM
(This post was last modified: 04-02-2024, 11:23 AM by click-click.)
Under the plugin for wimboot i see:
Quote:You can customize ventoy_wimboot.img as you need
There are many configurations in bcd file in ventoy_wimboot.img. For example, digital signature, test mode ...
You can customize them if the default template doesn't match your requirement.
I want to replace the boot.sdi to see if it will help booting Strelec's W11 .wim which doesn't finish booting with the current .sdi. I can unpack the .img with 7zip, but how do I repack it so it's still usable with Ventoy?
I don't see any instructions for repacking the wimboot.img
Posts: 331
Threads: 20
Joined: Jan 2021
Reputation:
37
(04-02-2024, 10:34 AM)click-click Wrote: Under the plugin for wimboot i see:
Quote:You can customize ventoy_wimboot.img as you need
There are many configurations in bcd file in ventoy_wimboot.img. For example, digital signature, test mode ...
You can customize them if the default template doesn't match your requirement.
I want to replace the boot.sdi to see if it will help booting Strelec's W11 .wim which doesn't finish booting with the current .sdi. I can unpack the .img with 7zip, but how do I repack it so it's still usable with Ventoy?
I don't see any instructions for repacking the wimboot.img change wimboot.img to wimboot.iso, use ultraiso to overwrite your boot.sdi and save the wimboot.iso file, then change wimboot.iso to wimboot.img
Posts: 17
Threads: 4
Joined: Jan 2023
Reputation:
0
04-02-2024, 01:53 PM
(This post was last modified: 04-02-2024, 01:55 PM by click-click.)
(04-02-2024, 11:51 AM)nguyen ha thai trong Wrote: (04-02-2024, 10:34 AM)click-click Wrote: Under the plugin for wimboot i see:
Quote:You can customize ventoy_wimboot.img as you need
There are many configurations in bcd file in ventoy_wimboot.img. For example, digital signature, test mode ...
You can customize them if the default template doesn't match your requirement.
I want to replace the boot.sdi to see if it will help booting Strelec's W11 .wim which doesn't finish booting with the current .sdi. I can unpack the .img with 7zip, but how do I repack it so it's still usable with Ventoy?
I don't see any instructions for repacking the wimboot.img change wimboot.img to wimboot.iso, use ultraiso to overwrite your boot.sdi and save the wimboot.iso file, then change wimboot.iso to wimboot.img Thanks, that works, but using the newer .sdi did not help my problem. Something between the W10 and W11 wim files must be dufferent that is causing the W11 boot not to finish even though it boots fine in UEFI mode.
Posts: 331
Threads: 20
Joined: Jan 2021
Reputation:
37
(04-02-2024, 01:53 PM)click-click Wrote: (04-02-2024, 11:51 AM)nguyen ha thai trong Wrote: (04-02-2024, 10:34 AM)click-click Wrote: Under the plugin for wimboot i see:
Quote:You can customize ventoy_wimboot.img as you need
There are many configurations in bcd file in ventoy_wimboot.img. For example, digital signature, test mode ...
You can customize them if the default template doesn't match your requirement.
I want to replace the boot.sdi to see if it will help booting Strelec's W11 .wim which doesn't finish booting with the current .sdi. I can unpack the .img with 7zip, but how do I repack it so it's still usable with Ventoy?
I don't see any instructions for repacking the wimboot.img change wimboot.img to wimboot.iso, use ultraiso to overwrite your boot.sdi and save the wimboot.iso file, then change wimboot.iso to wimboot.img Thanks, that works, but using the newer .sdi did not help my problem. Something between the W10 and W11 wim files must be dufferent that is causing the W11 boot not to finish even though it boots fine in UEFI mode. You can replace bootmgr in ventoy_wimboot.img with bootmgr in standard windows11.iso and it's ok.
Posts: 17
Threads: 4
Joined: Jan 2023
Reputation:
0
04-03-2024, 02:06 PM
(This post was last modified: 04-03-2024, 02:10 PM by click-click.)
When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO.
Posts: 331
Threads: 20
Joined: Jan 2021
Reputation:
37
04-03-2024, 02:42 PM
(This post was last modified: 04-03-2024, 02:45 PM by nguyen ha thai trong.)
(04-03-2024, 02:06 PM)click-click Wrote: When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO. You can download ventoy.wimboot.img updated by me as I shared here https://drive.google.com/file/d/1izQc322...sp=sharing
Posts: 17
Threads: 4
Joined: Jan 2023
Reputation:
0
04-03-2024, 03:22 PM
(This post was last modified: 04-03-2024, 03:27 PM by click-click.)
(04-03-2024, 02:42 PM)nguyen ha thai trong Wrote: (04-03-2024, 02:06 PM)click-click Wrote: When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO. You can download ventoy.wimboot.img updated by me as I shared here https://drive.google.com/file/d/1izQc322...sp=sharing Your img did the trick.  You are the best.  I also tried the bootmgr from a W11 iso and had the same problem. What did I do wrong? I renamed the .img to .iso and updated it with ultraiso and then renamed it back to .img. Does something else need to be done with ultraiso?
Posts: 331
Threads: 20
Joined: Jan 2021
Reputation:
37
(04-03-2024, 03:22 PM)click-click Wrote: (04-03-2024, 02:42 PM)nguyen ha thai trong Wrote: (04-03-2024, 02:06 PM)click-click Wrote: When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO. You can download ventoy.wimboot.img updated by me as I shared here https://drive.google.com/file/d/1izQc322...sp=sharing Your img did the trick. You are the best. I also tried the bootmgr from a W11 iso and had the same problem. What did I do wrong? I renamed the .img to .iso and updated it with ultraiso and then renamed it back to .img. Does something else need to be done with ultraiso? you have to get bootmgr in standard windows11.iso from Microsoft
Posts: 17
Threads: 4
Joined: Jan 2023
Reputation:
0
04-03-2024, 04:26 PM
(This post was last modified: 04-03-2024, 05:09 PM by click-click.)
(04-03-2024, 03:29 PM)nguyen ha thai trong Wrote: (04-03-2024, 03:22 PM)click-click Wrote: (04-03-2024, 02:42 PM)nguyen ha thai trong Wrote: (04-03-2024, 02:06 PM)click-click Wrote: When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO. You can download ventoy.wimboot.img updated by me as I shared here https://drive.google.com/file/d/1izQc322...sp=sharing Your img did the trick. You are the best. I also tried the bootmgr from a W11 iso and had the same problem. What did I do wrong? I renamed the .img to .iso and updated it with ultraiso and then renamed it back to .img. Does something else need to be done with ultraiso? you have to get bootmgr in standard windows11.iso from Microsoft I did a compare of the bootmgr I tried and the one you sent in the img. They both have the same SHA1 values. You must have updated the img differently than the way I described doing it.
Okay, I think maybe it's because mine was lowercase and yours upper case. Will try again..... that was the problem uppercase vs lowercase. The W11 iso I used has everything lowercase and I used bootmgr as is instead of BOOTMGR
Posts: 331
Threads: 20
Joined: Jan 2021
Reputation:
37
(04-03-2024, 04:26 PM)click-click Wrote: (04-03-2024, 03:29 PM)nguyen ha thai trong Wrote: (04-03-2024, 03:22 PM)click-click Wrote: (04-03-2024, 02:42 PM)nguyen ha thai trong Wrote: (04-03-2024, 02:06 PM)click-click Wrote: When I do that with the updated ventoy.wimboot.img I get CDBOOT: Could not find BOOTMGR on all my wim files now. I used the bootmgr from my HDD W11 EDUC system. I will try the one from an ISO. You can download ventoy.wimboot.img updated by me as I shared here https://drive.google.com/file/d/1izQc322...sp=sharing Your img did the trick. You are the best. I also tried the bootmgr from a W11 iso and had the same problem. What did I do wrong? I renamed the .img to .iso and updated it with ultraiso and then renamed it back to .img. Does something else need to be done with ultraiso? you have to get bootmgr in standard windows11.iso from Microsoft I did a compare of the bootmgr I tried and the one you sent in the img. They both have the same SHA1 values. You must have updated the img differently than the way I described doing it.
Okay, I think maybe it's because mine was lowercase and yours upper case. Will try again..... that was the problem uppercase vs lowercase. The W11 iso I used has everything lowercase and I used bootmgr as is instead of BOOTMGR Your finding is correct, the name bootmgr must be capitalized as BOOTMGR
|
