使用同样的ISO镜像，在两个机房试着安装，较旧的XP机房可以正常启动安装，但2014年的机房在客户端启动时总是会出错，也不知道原因，只好来论坛求指教了，附上部分LOG如下：
这个是之前测试时的LOG。再附上今天刚才的log:
有没有大神给个指点呀，谢谢
Quote:4283 2023/12/15 15:44:25.978 [TFTP] TFTP service stop finished OK
4284 2023/12/15 15:44:25.978 [HTTP] HTTP PXE service stop starting...
4285 2023/12/15 15:44:25.978 [HTTP] HTTP PXE master stop starting...
4286 2023/12/15 15:44:25.978 [HTTP] HTTP PXE master stop finished OK
4287 2023/12/15 15:44:25.978 [HTTP] HTTP PXE service stop finished OK
4288 2023/12/15 15:44:25.978 [NBD] NBD service stop starting...
4289 2023/12/15 15:44:25.978 [NBD] NBD master stop starting...
4290 2023/12/15 15:44:25.978 [NBD] NBD master stop finished OK
4291 2023/12/15 15:44:25.978 [NBD] NBD service stop finished OK
4292 2023/12/15 15:44:25.978 [PXE] iVentoy service stop OK.
4293 2023/12/15 15:44:25.989 [HTTP] API request: <{"method":"query_status"}>
4294 2023/12/15 15:44:26.022 [HTTP] API request: <{"method":"sys_ip_list"}>
4295 2023/12/15 15:44:26.032 [HTTP] API request: <{"method":"get_dhcp_mode"}>
4296 2023/12/15 15:45:28.161 [HTTP] API request: <{"method":"sys_ip_list"}>
4297 2023/12/15 15:45:28.199 [HTTP] API request: <{"method":"get_dhcp_mode"}>
4298 2023/12/15 15:45:41.753 [PXE] sigwait recv SIGTERM from PID 3323578.
4299 2023/12/15 15:45:41.753 [PXE] ==> PID:3323578 /bin/bash
4300 2023/12/15 15:45:41.753 [PXE] ==> PID:3307768 /bin/bash
4301 2023/12/15 15:45:41.753 [PXE] ==> PID:17775 SCREEN
4302 2023/12/15 15:45:41.753 [PXE] ==> PID:1 /sbin/init
4303 2023/12/15 15:45:41.753 [PXE] Recv stop signal ...
4304 2023/12/15 15:45:41.753 [PXE] Main loop break, now exit iventoy ...
4305 2023/12/15 15:45:41.753 [PXE] Now save iventoy config data ...
4306 2023/12/15 15:45:41.754 [PXE] iventoy config data (data/config.dat) save OK
4307 2023/12/15 15:45:41.754 [PXE] Module <NBD> exit ...
4308 2023/12/15 15:45:41.754 [NBD] NBD worker 0 stop starting...
4309 2023/12/15 15:45:41.754 [NBD] NBD worker 0 stop finished OK
4310 2023/12/15 15:45:41.754 [NBD] NBD worker 1 stop starting...
这个是之前测试时的LOG。再附上今天刚才的log:
Quote:2024/01/05 14:31:04.805 [DHCP] IP 192.168.1.201 is in DB, try next
2024/01/05 14:31:04.805 [DHCP] dhcp_cfg_alloc_ip alloc ip from pool i=2 192.168.1.202
2024/01/05 14:31:04.805 [DHCP] Recv DHCP Discover from 448a-5bb2-6bff, response DHCP OFFER with ip 192.168.1.202/255.255.255.0
2024/01/05 14:31:04.805 [DHCP] DHCP boot file is <ipxe.bios.0>
2024/01/05 14:31:08.869 [DHCP] Proc DHCP REQUEST pkt from client 448a-5bb2-6bff
2024/01/05 14:31:08.869 [DHCP] Recv DHCP Offer Request from 448a-5bb2-6bff, response DHCP ACK
2024/01/05 14:31:08.870 [TFTP] Parse tftp option(tsize,0)
2024/01/05 14:31:08.870 [TFTP] TFTP RRQ client 192.168.1.202:2070 download <ipxe.bios.0> start ...
2024/01/05 14:31:08.870 [TFTP] Start send file ipxe.bios.0 to 192.168.1.202:2070 with blksize 512, has oack 1
2024/01/05 14:31:08.870 [TFTP] Recv an ERROR opcode pkt from client 192.168.1.202:2070.
2024/01/05 14:31:08.871 [TFTP] Parse tftp option(blksize,1456)
2024/01/05 14:31:08.871 [TFTP] TFTP RRQ client 192.168.1.202:2071 download <ipxe.bios.0> start ...
2024/01/05 14:31:08.871 [TFTP] Start send file ipxe.bios.0 to 192.168.1.202:2071 with blksize 1456, has oack 1
2024/01/05 14:31:08.925 [TFTP] Finished send file to 192.168.1.202:2071 with blksize 1456 blks 92
2024/01/05 14:31:13.600 [DHCP] Proc DHCP DISCOVER pkt from client 448a-5bb2-6bff
2024/01/05 14:31:13.600 [DHCP] The client already exist, 192.168.1.202 448a-5bb2-6bff dhcp_rfc_proc_discover 1432
2024/01/05 14:31:13.600 [DHCP] Use the Last IP for PXE Client(44-8a-5b-b2-6b-ff) in normal mode.
2024/01/05 14:31:13.600 [PXE] Client 44-8a-5b-b2-6b-ff start PXE install in Legacy BIOS mode.
2024/01/05 14:31:13.600 [DHCP] Recv DHCP Discover from 448a-5bb2-6bff, response DHCP OFFER with ip 192.168.1.202/255.255.255.0
2024/01/05 14:31:13.600 [DHCP] DHCP boot file is <http://192.168.1.2:16000/ipxe/01-44-8a-5b-b2-6b-ff>
2024/01/05 14:31:14.625 [DHCP] Proc DHCP DISCOVER pkt from client 448a-5bb2-6bff
2024/01/05 14:31:14.625 [DHCP] The client already exist, 192.168.1.202 448a-5bb2-6bff dhcp_rfc_proc_discover 1432
2024/01/05 14:31:14.625 [DHCP] Use the Last IP for PXE Client(44-8a-5b-b2-6b-ff) in normal mode.
2024/01/05 14:31:14.625 [PXE] Client 44-8a-5b-b2-6b-ff start PXE install in Legacy BIOS mode.
2024/01/05 14:31:14.625 [DHCP] Recv DHCP Discover from 448a-5bb2-6bff, response DHCP OFFER with ip 192.168.1.202/255.255.255.0
2024/01/05 14:31:14.625 [DHCP] DHCP boot file is <http://192.168.1.2:16000/ipxe/01-44-8a-5b-b2-6b-ff>
有没有大神给个指点呀，谢谢