Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windows 10 legacy mode setup problem
(10-03-2022, 06:24 PM)nguyen ha thai trong Wrote: Select the iso file, press the i key, it boots the iso in compatibility mode, it doesn't enter the Secondary boot menu but boots the iso file. You partitioned on the 500gb hdd that you used Rufus ?
I made a video, but unfortunately my resolution is very bad.
I did the test with I that asked for compatibility mode, the result is that it doesn't find satan disk drive, that is, it doesn't work.
Video EFI mode, working normal even in normal menu.
Video Test-Off, As you can see, it does not leave the second menu screen, it is stuck there, in winboot mode, it is possible to delete the partitions, but after creating the partition it does not start installing, giving an error.
Now comes the biggest problem, as you can see in this last video Test-ON, same .iso same pc, all the same scenario, it passed the installation in legacy mode with normal option, if every 10 attempts it works, but if you restart and try again or it crashes or gives an error, as I showed in the photos sent earlier.
So I didn't find the problem and it's complex, because as you can see the .iso sometimes works sometimes it doesn't, remembering that it only happens in legacy mode.

Link to download videos:

Sorry for the english, but I'm using translator.

Messages In This Thread
RE: Windows 10 legacy mode setup problem - by jlsupremo - 10-03-2022, 07:37 PM

Forum Jump:

Users browsing this thread: 1 Guest(s)