(01-03-2023, 11:26 AM)sealyyyy Wrote:(01-03-2023, 08:49 AM)longpanda Wrote:(01-02-2023, 05:36 PM)sealyyyy Wrote: hi! i have a lenovo thinkpad x250 that the specs will be listed down, for some reason whenever i boot an iso on a 32gb (and a 16gb sandisk drive) both show a black screen and never boot, ive tested all the isos and they seem to always work, note that it stays stuck on a black screen and never boots into the iso, i have secure boot disabled and im on UEFI, i can also post a picture but its on my phone and im too lazy to get it, thanks for the help!
the specs:https://psref.lenovo.com/syspool/Sys/PDF/ThinkPad/ThinkPad_X250/ThinkPad_X250_Spec.PDF
When you boot the ISO file, it will popup a secondary boot menu.
https://www.ventoy.net/en/doc_secondary_boot_menu.html
Try other boot modes if you can not boot in normal mode.
ive tried that, both in text mode and normal mode, it didnt work sadly, any others you can reccomend, note that i have secure boot disabled, i can send a video of it/a screenshot, if its a video please excuse my shaking because i dont have a tripod, anyway note that also ive tested the isos, they worked, but in ventoy, for some apparent reason, they dont boot, i can send the links i got them from and you can check if they work fine, thanks!
Not normal mode and text mode.
Firstly, you should update Ventoy to the latest release.
Then when you boot an ISO file, it will popup a secondary boot menu. For example, when you boot an official Windows ISO file.
It will popup a menu with three selections:
Boot in normal mode.
Boot in wimboot mode.
File checksum
Try both Boot in normal mode and Boot in wimboot mode.