[SOLVED] After updating won't boot...

[haimoura]

The MBR is completly overritten.
Please run (assume that the Ventoy USB is /dev/sdb,  if not you must change the command)

Code:

sudo sh Ventoy2Disk.sh -u /dev/sdb
if=/dev/sdb of=3.bin bs=512 count=1

after that upload the 3.bin and the output log here.

there is no log file but this is the console output

Code:

**********************************************
      Ventoy: 1.0.61  x86_64
      longpanda admin@ventoy.net
      https://www.ventoy.net
**********************************************

Upgrade operation is safe, all the data in the 1st partition (iso files and other) will be unchanged!

Update Ventoy  1.0.61 ===> 1.0.61   Continue? (y/n)y
esp partition processing ...

Update Ventoy on /dev/sdd successfully finished.

the 3.bin is on attachment
thank you for your time

still no booting