Boot behavior with different MicroSD adapters

[testerics]

Ventoy 1.0.71 installed on MicroSD 32GB. Inserted in 2 MicroSD adapters. Multiple ISO inside.

   

Test on Toshiba Satellite (old model, LEGACY mode only):

LEGACY mode

Yellow adapter is booting well after boot menu (can be seen as Mass Storage Device).
All ISO's are working, even both MiniTool ISO's (MiniToolPartitionWizard v12.6 and MiniToolPowerDataRecovery v10.1) are working fine.

   

Black adapter is showing Grub shell after boot menu (can be seen as Generic USB SD Reader).

   


Test on Lenovo ThinkBook (new model, UEFI and LEGACY mode):

UEFI mode
Both adapter is booting, only 2 ISO (MiniToolPartitionWizard v12.6 and MiniToolPowerDataRecovery v10.1) are not working, both is presenting this error, even if both are x64 EFI bootable.

   

LEGACY mode

Both adapters is showing GRUB shell after boot menu (can be seen as Generic USB SD Reader or Mass Storage Device).

   


Very strange behaviour..

[testerics]

This is the first menu after a normal boot:

   

This is GRUB shell mode after wrong boot:

   

This is one of MiniTool ISO, EFI bootable, but working only in LEGACY mode:

   

In UEFI mode, I can see this:

   

[nguyen ha thai trong]

This is the first menu after a normal boot:



This is GRUB shell mode after wrong boot:



This is one of MiniTool ISO, EFI bootable, but working only in LEGACY mode:



In UEFI mode, I can see this:

Send me the link to download MiniTool ISO

[testerics]

@nguyen ha thai trong , you have PM.

[nguyen ha thai trong]

@nguyen ha thai trong , you have PM.

Your MiniToolPartitionWizard v12.6.iso does not support booting in uefi because of the wrong way to create boot in uefi
Use ultraiso/poweriso/winiso to open your minitool.iso, overwrite the file efisys.bin (downloaded from the download link sent to you) into the boot folder and then save the iso file will fix the error.Link down :https://www.mediafire.com/file/azgaam5zr...s.bin/file

[testerics]

Thank you for your help, but unfortunately the result after replacing efisys.bin is the same..

   

[nguyen ha thai trong]

Thank you for your help, but unfortunately the result after replacing efisys.bin is the same..

Your iso file error when booting in uefi is caused by the incorrect way of creating boot. You download minitool.iso by following the link below to use it.
https://www.mediafire.com/file/91jw4zgzt...d.iso/file

[testerics]

You are incredible, your ISO is WORKING well on UEFI boot!!
Thank you very much!
Can you fix also MiniToolPowerDataRecoveryTechnician v10.1? - https://www.mediafire.com/file/6lhs1w2yz...n.iso/file
For me, replacing only efisys.bin with UltraISO and saving it looks like is not working..
What do you use to verify the correct or incorrect ISO file to boot in UEFI?
Thanks again!