Ventoy Forums
linux os boot - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use —— Ventoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: linux os boot (/showthread.php?tid=1687)



linux os boot - thedoctor - 05-27-2021

Hello guys,
I have ventoy USB prepared as per instructions in MBR and with secure boot. I can boot to windows and linux iso fine on my old dell xps L502X laptop. But on my gaming system I can boot to windows iso, however the linux iso does not boot, if i force text during boot, either it gets stuck or does not display anything. One error i have noticed is xCHI failed/usb disconnect and sometimes "Begin: running /scripts/nfs-premount . . . done." followed by nothing. System just hangs.
Have tried ubuntu 20, linuxmint17 and 20, kali linux, zorin OS lite.

Spec:
Ryzen 3600, nvidia 1660, msi b450 MB in both UEFI and CSM mode. Secure boot disabled.

Any guidance is much appreciated.


RE: linux os boot - longpanda - 05-28-2021

You can write the linux ISO directly to the USB by some tools(e.g. rufus) to make a comparison test.
This will make sure that whether this problem only occurs when you boot these iso files by Ventoy.


RE: linux os boot - Midas - 05-28-2021

longpanda Wrote:You can write the linux ISO directly to the USB by some tools(e.g. rufus) to make a comparison test.

Other possible choices:
  1. UNetBootin (https://unetbootin.github.io/).
  2. Universal USB Installer (https://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/).
  3. Rufus (https://rufus.ie/)
  4. Etcher (https://www.balena.io/etcher/)



RE: linux os boot - thedoctor - 05-29-2021

(05-28-2021, 01:42 AM)longpanda Wrote: You can write the linux ISO directly to the USB by some tools(e.g. rufus) to make a comparison test.
This will make sure that whether this problem only occurs when you boot these iso files by Ventoy.
Hey thanks.

Yes the problem seems to be my desktop. The linux live usb also had the same issue.
After googling found that some kernel have issue with usb power and stuff. but i could not seem to find a break to make it work in this desktop. Just updated to the latest available bios, still same issues. Pointer if any would be very helpful.

It is always usb device descripter failed read/64, error -100 or error -71 and unable to enumerate usb device, which actually turns off the pendrive with the OS/ventoy


RE: linux os boot - Steve2926 - 06-02-2021

(05-27-2021, 02:31 PM)thedoctor Wrote: Hello guys,
I have ventoy USB prepared as per instructions in MBR and with secure boot. I can boot to windows and linux iso fine on my old dell xps L502X laptop. But on my gaming system I can boot to windows iso, however the linux iso does not boot, if i force text during boot, either it gets stuck or does not display anything. One error i have noticed is xCHI failed/usb disconnect and sometimes "Begin: running /scripts/nfs-premount . . . done." followed by nothing. System just hangs.
Have tried ubuntu 20, linuxmint17 and 20, kali linux, zorin OS lite.

Spec:
Ryzen 3600, nvidia 1660, msi b450 MB in both UEFI and CSM mode. Secure boot disabled.

Any guidance is much appreciated.

Try all USB ports and try a different USB drive.
Try connecting USB drive using a USB 2 extension cable.
What is USB drive? How is it connected?
It looks like a Linux USB driver issue with your hardware.