+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: iVentoy General Use —— iVentoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=7)
+--- Forum: iVentoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=8)
+--- Thread: Proxmox ve 8 (/showthread.php?tid=2572)
Proxmox ve 8 - Gyppie77 - 07-19-2023
Hi,
I'm having problem with proxmox ve 8. Its similar to the problem I had with debian and ubuntu. The pc I am using as a test rig is a 6th gen intel prosessor and chipset with an RTL8111H gigabit lan controller. It doesn't get an ip address, and I cant ping my network.
https://forums.ventoy.net/showthread.php?tid=2542
RE: Proxmox ve 8 - longpanda - 07-20-2023
1. Use the latest 1.0.16
2. When you dropped into the shell in the screenshot run cat /ventoy/log and send me the result.
RE: Proxmox ve 8 - Gyppie77 - 07-20-2023
Here is the log.
RE: Proxmox ve 8 - longpanda - 07-20-2023
Can you confirm that which KO is your nic driver in linux? is it r8169.ko?
From the log we see that after install the r8169.ko driver, the system still can not detect the nic.
RE: Proxmox ve 8 - Gyppie77 - 07-20-2023
(07-20-2023, 07:32 AM)longpanda Wrote: Can you confirm that which KO is your nic driver in linux? is it r8169.ko?
From the log we see that after install the r8169.ko driver, the system still can not detect the nic.
Yes, what I can understand from searching on internet, r8169 should support my card RTL8111H. Its listed in the r8169_main.c on github, if I'm not mistaking it.
https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/realtek/r8169_main.c