+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use —— Ventoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: WinPE 10-8 Sergei Strelec ? (/showthread.php?tid=54)
RE: WinPE 10-8 Sergei Strelec ? - dickw - 06-15-2020
Thanx! Tested WinPE 10-8 Sergei Strelec English - it works with ventoy-1.0.13
Tested ISO's:
- WinPE10_8_Sergei_Strelec_x86_x64_2020.04.27_English.iso
- WinPE10_8_Sergei_Strelec_x86_x64_2020.06.09_English.iso
Download: https://sergeistrelec.ru/
Boot:
- Legacy
- UEFI (Secure Boot Disabled)
Tested laptops:
- Processor: Intel i5-5200U (Broadwell)
Laptop: Lenovo Z51-70
- Processor: Intel i5-2410M (Sandy Bridge)
Laptop: Packard Bell EN TS1HR
RE: WinPE 10-8 Sergei Strelec ? - senchi - 06-15-2020
(06-15-2020, 02:37 AM)longpanda Wrote: You can make a try with ventoy-1.0.13 with SiergiejStrelec PE support.
thank you, working now in my uefi computer, but causes bsod in my other legacy computer.
RE: WinPE 10-8 Sergei Strelec ? - longpanda - 06-16-2020
Please make sure that the BSOD is indeed related to Ventoy.
you can use other tools to make a bootable USB with the same ISO file and same USB disk and make a comparison test.
RE: WinPE 10-8 Sergei Strelec ? - zolventh - 06-16-2020
yeah, it looks like normal sergei s. x64 winpe boots okay. but like half of the pc's i have tested, booting of "native mode" sergei strelec winpe x86 crashes after windows loading screen & reboots the pc.
can you focus on it, @longpanda?
RE: WinPE 10-8 Sergei Strelec ? - dickw - 06-16-2020
(06-16-2020, 01:24 AM)longpanda Wrote: Please make sure that the BSOD is indeed related to Ventoy.
you can use other tools to make a bootable USB with the same ISO file and same USB disk and make a comparison test.
For info:
I don't have BSOD when I make a bootable USB with ventoy-1.0.13.
I make bootable USB with the same ISO's and the same USB disk also with Rufus and UltraISO and I don't have any crash/BSOD.
RE: WinPE 10-8 Sergei Strelec ? - zxy - 06-29-2020
WinPE8x86(Native) isn't working even on Ventoy 1.0.14. There's a blue screen and a computer restarts automatically. This mode works only if SSTR folder is copied onto a pendrive. Other modes are working without copying the SSTR folder. Legacy Mode
Can you fix it?
RE: WinPE 10-8 Sergei Strelec ? - longpanda - 06-30-2020
(06-29-2020, 05:28 AM)zxy Wrote: WinPE8x86(Native) isn't working even on Ventoy 1.0.14. There's a blue screen and a computer restarts automatically. This mode works only if SSTR folder is copied onto a pendrive. Other modes are working without copying the SSTR folder. Legacy Mode
Can you fix it?
Sorry! WinPE8x86 Native has a very special PE wim file. I run into problem to make hook in it.
However, this native mode is just for very old, underprovisioned computer.
Copy from sergeistrelec official FAQ
Quote:This is a special mode in which a specially prepared minimal core is loaded first (without a graphical shell) and runs a script that searches for media (DVD, USB-HDD) with the assembly and mounts the "full" core.
+ Pros:
1. Fast boot to USB 1.x. Instead of the usual 5-10 minutes on USB 1.2 - about 1 minute.
2. Less memory consumption (to build Strelec - less by ~ 250MB).
3. Reduced CPU requirements (Native Mode core has been patched to work with CPUs starting with P4 / Athlon), NX-bit checking is disabled.
-Minuses:
1. Binding to the media (when you remove it, the PC will “freeze”).
2. Slower kernel operation (since everything is loaded not from a fast RAM disk, but from a slower media). In practice, special "brakes" are not felt.
3. RunScanner does not work correctly (a utility for redirecting programs to work with the registry of the target OS), redirection to the registry of the target OS does not occur.
4. For compatibility with old CPUs, support for multicore and PAE is disabled.
Note: On modern PCs, it is better to use normal boot mode.
RE: WinPE 10-8 Sergei Strelec ? - zxy - 06-30-2020
(06-30-2020, 01:40 AM)longpanda Wrote:It's too bad that it can't be done(06-29-2020, 05:28 AM)zxy Wrote: WinPE8x86(Native) isn't working even on Ventoy 1.0.14. There's a blue screen and a computer restarts automatically. This mode works only if SSTR folder is copied onto a pendrive. Other modes are working without copying the SSTR folder. Legacy Mode
Can you fix it?
Sorry! WinPE8x86 Native has a very special PE wim file. I run into problem to make hook in it.
However, this native mode is just for very old, underprovisioned computer.
Copy from sergeistrelec official FAQ
Quote:This is a special mode in which a specially prepared minimal core is loaded first (without a graphical shell) and runs a script that searches for media (DVD, USB-HDD) with the assembly and mounts the "full" core.
+ Pros:
1. Fast boot to USB 1.x. Instead of the usual 5-10 minutes on USB 1.2 - about 1 minute.
2. Less memory consumption (to build Strelec - less by ~ 250MB).
3. Reduced CPU requirements (Native Mode core has been patched to work with CPUs starting with P4 / Athlon), NX-bit checking is disabled.
-Minuses:
1. Binding to the media (when you remove it, the PC will “freeze”).
2. Slower kernel operation (since everything is loaded not from a fast RAM disk, but from a slower media). In practice, special "brakes" are not felt.
3. RunScanner does not work correctly (a utility for redirecting programs to work with the registry of the target OS), redirection to the registry of the target OS does not occur.
4. For compatibility with old CPUs, support for multicore and PAE is disabled.
Note: On modern PCs, it is better to use normal boot mode.
The Native Mode has really low system requirements and loads almost instantly.
It's good even for modern PCs, because it's so fast.
RE: WinPE 10-8 Sergei Strelec ? - zolventh - 07-01-2020
(06-30-2020, 01:52 PM)zxy Wrote:(06-30-2020, 01:40 AM)longpanda Wrote:It's too bad that it can't be done(06-29-2020, 05:28 AM)zxy Wrote: WinPE8x86(Native) isn't working even on Ventoy 1.0.14. There's a blue screen and a computer restarts automatically. This mode works only if SSTR folder is copied onto a pendrive. Other modes are working without copying the SSTR folder. Legacy Mode
Can you fix it?
Sorry! WinPE8x86 Native has a very special PE wim file. I run into problem to make hook in it.
However, this native mode is just for very old, underprovisioned computer.
Copy from sergeistrelec official FAQ
Quote:This is a special mode in which a specially prepared minimal core is loaded first (without a graphical shell) and runs a script that searches for media (DVD, USB-HDD) with the assembly and mounts the "full" core.
+ Pros:
1. Fast boot to USB 1.x. Instead of the usual 5-10 minutes on USB 1.2 - about 1 minute.
2. Less memory consumption (to build Strelec - less by ~ 250MB).
3. Reduced CPU requirements (Native Mode core has been patched to work with CPUs starting with P4 / Athlon), NX-bit checking is disabled.
-Minuses:
1. Binding to the media (when you remove it, the PC will “freeze”).
2. Slower kernel operation (since everything is loaded not from a fast RAM disk, but from a slower media). In practice, special "brakes" are not felt.
3. RunScanner does not work correctly (a utility for redirecting programs to work with the registry of the target OS), redirection to the registry of the target OS does not occur.
4. For compatibility with old CPUs, support for multicore and PAE is disabled.
Note: On modern PCs, it is better to use normal boot mode.
The Native Mode has really low system requirements and loads almost instantly.
It's good even for modern PCs, because it's so fast.
i agree. :/ and i have some 10+ year old pc's in my work load..
RE: WinPE 10-8 Sergei Strelec ? - longpanda - 07-01-2020
Maybe we can try to ask the author to add support for Ventoy like USM and Hikari PE.
That will be the perfect solution.