Thread Rating:
  • 2 Vote(s) - 4.5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ventoy Persistence has become discouraging. What have I done wrong.?
#1
If I fail to properly format this post, it can also be seen on Linux Mint forums:
https://forums.linuxmint.com/viewtopic.p...6&t=325131

I think I went astray following someone's mistakes on another website. I deleted that link.
Now, I am at a loss after playing with this off and on, for about 2 weeks.

Ventoy Installs and Boots fine, whether the Partition Table is msdos or GPT.
I finally found the -g option and it is now on a GPT Partition Table, Formatted as ext4.

I am at a loss after trying different things, including reinstalling a couple of times.

No Persistence option in the menu.
No Persistence in settings on re-boot.

Ventoy_File_Structure_2020-07-12
[Image: h5jvHic.png]

Ventoy_Partition_Format_2020-07-12: Previous
[Image: Y4TelRl.png?1]

Mount Difference: Current
Code: Select all
Code:
VTOYEFI mounted as fat16 on /dev/sdb2 /media/gt/VTOYEFI
ventoy  mounted as ext4 on /dev/sdb1 /mnt/gt/ventoy

Current Content in: ventoy.json
Code: Select all
Code:
# ventoy.json

{
    "persistence": [
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence.img"
        },
              
        {
            "image": "/lmde-4-cinnamon-64bit.iso",
            "backend": "/persistence.img",
            "autosel": 1           
        }
    ]
}

Previous Content ventoy.json
Code: Select all
Code:
# ventoy.json
{
    "persistence": [
        {
            "image": "/ISO/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence/linuxmint-20-cinnamon-64bit.img"
        },
              
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence/linuxmint_20.img",
            "autosel": 1           
        }
    ]
}
Reply
#2
I can't see the photo in the link.
You can press F5 in Ventoy boot menu and check the json configuration for persistence and see the result.

Take care about that: 

ventoy  mounted as ext4 on /dev/sdb1 /mnt/gt/ventoy

The ventoy.json should under a ventoy directory, so the full path may be  /mnt/gt/ventoy/ventoy/ventoy.json
Reply
#3
The problem is apparently the existence of empty lines and trailing spaces.

This should work:

Code:
{
    "persistence": [
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence.img"
        },
        {
            "image": "/lmde-4-cinnamon-64bit.iso",
            "backend": "/persistence.img",
            "autosel": 1
        }
    ]
}

Tip: you can validate your json syntax by pressing F5 in Ventoy screen.
Reply
#4
Thank you, longpanda and renatofrota.

I can't tell you how encouraging this is.
I'll be trying these fixes in the next day or 2, and will report the result.

Looking forward to replacing MultiSystem with Ventoy.
Reply
#5
Correct me if I am wrong, but isn't Persistence stated to ONLY work on some filesystems with ExFAT NOT being one of them?

Found this in the last paragraph here

FYI
Smile Happy to learn how to ...
Reply
#6
ExFAT also OK.
You can use F5 debug to check the persistence config and show me the photo.
Reply
#7
I made a change and fixed empty lines and trailing spaces.



The menu shows Mint 20 and LMDE-4.

No persistence options indicated.



The file path looks proper.


Code:
/dev/sdb2  7D22-F13A
Mounted on /media/gt/VTOYEFI
Code:
/dev/sdb1  ventoy
Mounted on /mnt/gt/ventoy




Directory looks correct as the example suggested:

Code:
/mnt/gt/ventoy/ventoy/ventoy.json


Properties shows:


Code:
/mnt/gt/ventoy
/mnt/gt/ventoy/ventoy
/mnt/gt/ventoy/ventoy/ventoy.json

/mnt/gt/ventoy/linuxmint-20-cinnamon-64bit.iso
/mnt/gt/ventoy/persistence.img

/mnt/gt/ventoy/lmde-4-cinnamon-64bit.iso
/mnt/gt/ventoy/persistence.img




On re-boot, F5 gives a syntax error message.



I removed the space from the top line: #ventoy.json

I'll be back after a reboot with the current .json file:


Code:
#ventoy.json
{
    "persistence": [
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence.img"
            "autosel": 1
        },
        {
            "image": "/lmde-4-cinnamon-64bit.iso",
            "backend": "/persistence.img",
        }
    ]
}

Just rebooted.
F5 shows an error message, more or less like this:
Quote:############## Syntax errors... ##############


That error message may be the same as before, but I can not say for sure.

So, where could the problem be?
Reply
#8
You can use some online tool to check the syntax of the ventoy.json. For example  http://json.parser.online.fr

This is the correct format:
Code:
{
    "persistence": [
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence.img",
            "autosel": 1
        },
        {
            "image": "/lmde-4-cinnamon-64bit.iso",
            "backend": "/persistence.img"
        }
    ]
}
Reply
#9
I just checked again.

F5 shows an error message:
Quote:##############  Dump Persistence  ##############


I'll have to return later to check the syntax tool.

Thank you.
Reply
#10
Result of checking the syntax shows the following:


Quote:SyntaxError: JSON.parse: expected ',' or '}' after property value in object at line 6 column 13 of the JSON data

    "backend":"/persistence.img""autosel": 1

},


Quote:"autosel": 1
seemed to be on a separate line, but I removed it, anyway.

Now rebooting to test...

Result of checking the syntax shows the following:




Quote:SyntaxError: JSON.parse: expected ',' or '}' after property value in object at line 6 column 13 of the JSON data

    "backend":"/persistence.img""autosel": 1
},


Quote:"autosel": 1
seemed to be on a separate line, but I removed it, anyway.



Rebooting failed the test...

Quote:#ventoy.json
{
    "persistence": [
        {
            "image": "/linuxmint-20-cinnamon-64bit.iso",
            "backend": "/persistence.img"
        },
        {
            "image": "/lmde-4-cinnamon-64bit.iso",
            "backend": "/persistence.img",
        }
    ]
}

Parser shows the following:
Quote:SyntaxError: JSON.parse: unexpected character at line 1 column 1 of the JSON data
So, commenting out the top line is the screw up.
Now going to test it... without the commented out file name.

Result of checking the syntax shows the following:

SyntaxError: JSON.parse: expected ',' or '}' after property value in object at line 6 column 13 of the JSON data

    "backend":"/persistence.img""autosel": 1

},

"autosel": 1 seemed to be on a seperate line, but I removed it, anyway.

Now rebooting to test...

Conclusion: Persistentence Failure is a Fatal Flaw as my system is configured.
Maybe the file system, uEFI, who knows....

I give up.

Thanks for you help.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)