Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
WIN10XPE fails to load
#1
In version 1.0.16 and 1.0.17 and 1.0.18 Win10XPE starts loading but fails about a quarter of he way .
error says disk was removed.
Version 1.0.14 and 1.0.15 work fine

here is the error


Attached Files Thumbnail(s)
   
Reply
#2
I'm having the same issue with 1.0.18 and Gandalf's Windows 10PE x64 Redstone 5.


Attached Files Thumbnail(s)
   
Reply
#3
You have to read a little bit in the forum and on ventoy.

If an ISO does not boot in the normal way there is the alternative with F1: Memdisk or extract the boot.wim and boot from the boot.wim


https://www.ventoy.net/en/doc_memdisk.html

https://www.ventoy.net/en/plugin_wimboot.html
Reply
#4
Yeah - As mentioned in the tested image thread, these ISOs worked fine prior to 1.0.16.
Reply
#5
(08-05-2020, 07:04 AM)Van Flusen Wrote: You have to read a little bit in the forum and on ventoy.

If an ISO does not boot in the normal way there is the alternative with F1: Memdisk or extract the boot.wim and boot from the boot.wim


https://www.ventoy.net/en/doc_memdisk.html

https://www.ventoy.net/en/plugin_wimboot.html

Memdisk does work. Thanks for the reminder

Any idea why it worked without memdisk in 1.0.16 and before and now it doesn't ?
Reply
#6
(08-06-2020, 01:33 PM)dancer78 Wrote:
(08-05-2020, 07:04 AM)Van Flusen Wrote: You have to read a little bit in the forum and on ventoy.

If an ISO does not boot in the normal way there is the alternative with F1: Memdisk or extract the boot.wim and boot from the boot.wim


https://www.ventoy.net/en/doc_memdisk.html

https://www.ventoy.net/en/plugin_wimboot.html

Memdisk does work. Thanks for the reminder

Any idea why it worked without memdisk in 1.0.16 and before and now it doesn't ?

You write that WINXPE does not work with 1.0.16, 1.0.17 and 1.0.18.
cyablo writes here: https://forums.ventoy.net/showthread.php?tid=398
I used Ventoy 1.0.15. The .16 was released yesterday, I'll give it a try.
You're right! It works with 1.0.16.

I think there are too many different Bios and UEFI systems. 450 different ISO should work without problems on all systems? We must not forget that longpanda has to modify the code for some ISO to make them work. This can cause problems for other ISOs that were working before. We should not complain if we need to use Memdisk or an extracted boot.wim.
Reply
#7
(08-06-2020, 04:46 PM)Van Flusen Wrote:
(08-06-2020, 01:33 PM)dancer78 Wrote:
(08-05-2020, 07:04 AM)Van Flusen Wrote: You have to read a little bit in the forum and on ventoy.

If an ISO does not boot in the normal way there is the alternative with F1: Memdisk or extract the boot.wim and boot from the boot.wim


https://www.ventoy.net/en/doc_memdisk.html

https://www.ventoy.net/en/plugin_wimboot.html

Memdisk does work. Thanks for the reminder

Any idea why it worked without memdisk in 1.0.16 and before and now it doesn't ?

You write that WINXPE does not work with 1.0.16, 1.0.17 and 1.0.18.
cyablo writes here: https://forums.ventoy.net/showthread.php?tid=398
I used Ventoy 1.0.15. The .16 was released yesterday, I'll give it a try.
You're right! It works with 1.0.16.

I think there are too many different Bios and UEFI systems. 450 different ISO should work without problems on all systems? We must not forget that longpanda has to modify the code for some ISO to make them work. This can cause problems for other ISOs that were working before. We should not complain if we need to use Memdisk or an extracted boot.wim.

I don't think anyone is complaining - I posted my particular ISO (Galdalf's) as tested and working with 1.0.15 just prior to 1.0.16 being released and am now reporting it as no longer working since it is now listed on the "Tested ISO" page.

Note: Memdisk isn't an option in my environment due to ISO size vs. RAM - Workarounds are great, but my guess is that longpanda would want to know when there are things that no longer work following a release, and that's why this thread exists :-)
Reply
#8
Photo 
I tried multiple sizes of win10xpe without f1 to see what happened and made list below.
XPE 1,2 worked
XPE 3-6 failed with error in picture 1
Xpe 7-11 failed with error in picture 2


Win10xpe size          iso size      boot.win size      boot           type of error

                             1096348       1056753           yes             none
                             1110406       1056753           yes             none
                             1119896       1061043           no              picture 1
                             1132680       1062776           no              picture 1
                             1142372       1062776           no              picture 1
                             1652518       1070308           no              picture 1
                             1690552       1070782           no              picture 2
                             1815392       1070783           no              picture 2
                             1903230       1070783           no              picture 2
                             1997234       1070783           no              picture 2
                             2136480       1071788           no              picture 2

NOTE: all Win10XPE iso's will load using f1 (memboot)
      and all boot.wim will load if ventoy_wimboot.img is there


Attached Files Thumbnail(s)
       
Reply
#9
I am having the same problem with 1.0.18.
Reply
#10
Hello Dancer78,

At this Link :

https://forums.ventoy.net/showthread.php?tid=71

My WinxPE = F:\Iso\1_PE-EE_W10xPE_Plus-de-100-Progs_14-03-19_V0_x64-French_By-ME=OK.ISO Work Fine.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)