Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ventoy 1.0.61 Installation Error
#1
Exclamation 
Hello everybody,

I am confronted with an error, using this last version of Ventoy, and I had replicated the error multiple times. Always the same result, installation fails.

The previous version of Ventoy that I had used, 1.0.37, works perfect for me, however with this current version installtion leads to an unusable USB Flash Drive.

I am not able to see the USB drive listed in the file manager any longer, after attempting to install Ventoy, unless of course I re-format.

Here are the screenshots in GParted before and after install attempt, as well as the terminal command window in MX Linux 19.4, when atempting to install.

See the error message, I do not get any error at all with the previous versions of Ventoy that I had used, only with this one.

Take note that despite the message at the end of installation stating that installation was succesfull, obviously it was not so.

Here are the screenshots, when going thru the installtion process.

Hope this helps and thank you for the usefull tool that Ventoy is.


Attached Files Thumbnail(s)
           
Reply
#2
Please test with this CI release:
https://github.com/ventoy/Ventoy/actions...1502151444
https://www.ventoy.net/en/doc_github_ci.html
Reply
#3
There is nothing to download.
Reply
#4
You need to sign in github to download the release as follows:
https://www.ventoy.net/en/doc_github_ci.html
Reply
#5
It's ridiculous, you need to have an account for every website you visit these days... it's not going to happen.
I only meant to report an error, not to sign up for yet another website.
Reply
#6
download it here

https://www.mediafire.com/file/buidxebt9...x.zip/file
Reply
#7
(11-28-2021, 03:48 PM)Diamax Wrote: It's ridiculous, you need to have an account for every website you visit these days... it's not going to happen.
I only meant to report an error, not to sign up for yet another website.
Sorry. I thought you have a github account.
You can download from the above link given by @nguyen ha thai trong  and try.
If you don't want, you can wait for the next Ventoy release.
Reply
#8
Thank you Nguyen for the download link.

Longpanda, I did not mean to lash out at you, is just that I can't stand having to create accounts and login to all sorts of websites these days... today the internet puts too much emphasis on statistics instead of quality of experience.

I am in no hurry, I just wanted to make sure you guys are aware of the error, so it does not go unnoticed, and plague Ventoy in future releases. I thought that is the least I can do, on my part, as a user.

I wish you all the best guys!
Reply
#9
Hi Longpanda, with the new version of Ventoy, 1.0.62, I get pretty much the same error. This time I had tried the web install as well. Here are the screenshots.

And here is log.txt:

############# Ventoy2Disk /dev/sdd [x86_64] ################
Thu 02 Dec 2021 11:42:12 AM EST
decompress tools
############# Ventoy2Disk -i /dev/sdd [x86_64] ################
Thu 02 Dec 2021 11:42:44 AM EST
decompress tools
MODE=install FORCE= RESERVE_SPACE= RESERVE_SIZE_MB=0
hexdump test ok ...
mkexfatfs test ok ...
vtoycli fat test ok ...
tool check success ...
check tool work ok
root permission check ok ...
install Ventoy ...
/dev/sdd2 not exist
format_ventoy_disk_mbr 0 /dev/sdd parted ...
part1_start_sector=2048  part1_end_sector=243339263
part2_start_sector=243339264  part2_end_sector=243404799
format disk by parted ...
############# Ventoy2Disk -i /dev/sdd [x86_64] ################
Thu 02 Dec 2021 11:49:18 AM EST
decompress tools
MODE=install FORCE= RESERVE_SPACE= RESERVE_SIZE_MB=0
hexdump test ok ...
mkexfatfs test ok ...
vtoycli fat test ok ...
tool check success ...
check tool work ok
root permission check ok ...
install Ventoy ...
Ventoy version in /dev/sdd2 is 1.0.61
############# Ventoy2Disk -i /dev/sdd [x86_64] ################
Thu 02 Dec 2021 12:11:39 PM EST
decompress tools
MODE=install FORCE= RESERVE_SPACE= RESERVE_SIZE_MB=0
hexdump test ok ...
mkexfatfs test ok ...
vtoycli fat test ok ...
tool check success ...
check tool work ok
root permission check ok ...
install Ventoy ...
/dev/sdd1 not exist
format_ventoy_disk_mbr 0 /dev/sdd parted ...
part1_start_sector=2048  part1_end_sector=243339263
part2_start_sector=243339264  part2_end_sector=243404799
format disk by parted ...
############# Ventoy2Disk -i /dev/sdd [x86_64] ################
Thu 02 Dec 2021 01:49:25 PM EST
decompress tools
MODE=install FORCE= RESERVE_SPACE= RESERVE_SIZE_MB=0
hexdump test ok ...
mkexfatfs test ok ...
vtoycli fat test ok ...
tool check success ...
check tool work ok
root permission check ok ...
install Ventoy ...
/dev/sdd1 not exist
format_ventoy_disk_mbr 0 /dev/sdd parted ...
part1_start_sector=2048  part1_end_sector=243339263
part2_start_sector=243339264  part2_end_sector=243404799
format disk by parted ...
test uuid: 00000000  cb 7e a1 5d d3 08 4c b6  b8 5f 14 14 6a 2c fd 45  |.~.]..L.._..j,.E|
00000010
[2021/11/02 13:51:23] ===============================================
[2021/11/02 13:51:23] ===== Ventoy2Disk 1.0.62 127.0.0.1:24680 =====
[2021/11/02 13:51:23] ===============================================
[2021/11/02 13:51:23] ventoy_disk_enumerate_all
[2021/11/02 13:51:23] get disk info sdd
[2021/11/02 13:51:23] get disk size from sysfs for sdd
[2021/11/02 13:51:23] ventoy_get_vtoy_data /dev/sdd
[2021/11/02 13:51:23] Not valid ventoy partition layout [0 0] [0 0]
[2021/11/02 13:51:23] disk:</dev/sdd 8:48> model:<Lexar USB Flash Drive (USB)> size:124623257600 (128 GB)
[2021/11/02 13:51:23] /dev/sdd NO Ventoy detected
[2021/11/02 13:51:23] get disk info sdb
[2021/11/02 13:51:23] get disk size from sysfs for sdb
[2021/11/02 13:51:23] ventoy_get_vtoy_data /dev/sdb
[2021/11/02 13:51:23] Invalid efi part2 name <>
[2021/11/02 13:51:23] disk:</dev/sdb 8:16> model:<ATA Morebeck-N100  2 (scsi)> size:256060514304 (256 GB)
[2021/11/02 13:51:23] /dev/sdb NO Ventoy detected
[2021/11/02 13:51:23] get disk info sda
[2021/11/02 13:51:23] get disk size from sysfs for sda
[2021/11/02 13:51:23] ventoy_get_vtoy_data /dev/sda
[2021/11/02 13:51:23] Not valid ventoy partition layout [2048 629145600] [629147648 419430400]
[2021/11/02 13:51:23] disk:</dev/sda 8:0> model:<ATA Samsung SSD 860 (scsi)> size:1000204886016 (1024 GB)
[2021/11/02 13:51:23] /dev/sda NO Ventoy detected
[2021/11/02 13:51:23] ============= DISK DUMP ============
[2021/11/02 13:51:23] /dev/sdd [128 GB] Lexar USB Flash Drive (USB) Ventoy: NA
[2021/11/02 13:51:23] /dev/sda [1024 GB] ATA Samsung SSD 860 (scsi) Ventoy: NA
[2021/11/02 13:51:23] /dev/sdb [256 GB] ATA Morebeck-N100  2 (scsi) Ventoy: NA
[2021/11/02 13:51:36] ventoy_disk_enumerate_all
[2021/11/02 13:51:36] get disk info sdd
[2021/11/02 13:51:36] get disk size from sysfs for sdd
[2021/11/02 13:51:36] ventoy_get_vtoy_data /dev/sdd
[2021/11/02 13:51:36] Not valid ventoy partition layout [0 0] [0 0]
[2021/11/02 13:51:36] disk:</dev/sdd 8:48> model:<Lexar USB Flash Drive (USB)> size:124623257600 (128 GB)
[2021/11/02 13:51:36] /dev/sdd NO Ventoy detected
[2021/11/02 13:51:36] get disk info sdb
[2021/11/02 13:51:36] get disk size from sysfs for sdb
[2021/11/02 13:51:36] ventoy_get_vtoy_data /dev/sdb
[2021/11/02 13:51:36] Invalid efi part2 name <>
[2021/11/02 13:51:36] disk:</dev/sdb 8:16> model:<ATA Morebeck-N100  2 (scsi)> size:256060514304 (256 GB)
[2021/11/02 13:51:36] /dev/sdb NO Ventoy detected
[2021/11/02 13:51:36] get disk info sda
[2021/11/02 13:51:36] get disk size from sysfs for sda
[2021/11/02 13:51:36] ventoy_get_vtoy_data /dev/sda
[2021/11/02 13:51:36] Not valid ventoy partition layout [2048 629145600] [629147648 419430400]
[2021/11/02 13:51:36] disk:</dev/sda 8:0> model:<ATA Samsung SSD 860 (scsi)> size:1000204886016 (1024 GB)
[2021/11/02 13:51:36] /dev/sda NO Ventoy detected
[2021/11/02 13:52:08] ==================================================================================
[2021/11/02 13:52:08] ===== ventoy install /dev/sdd style:MBR secureboot:0 align4K:1 reserve:0 =========
[2021/11/02 13:52:08] ==================================================================================
[2021/11/02 13:52:08] disk is not mounted now, we can do the install ...
[2021/11/02 13:52:08] start install thread Lexar USB Flash Drive (USB) ...
[2021/11/02 13:52:08] ventoy_install_thread run ...
[2021/11/02 13:52:08] check disk sdd
[2021/11/02 13:52:08] disk is not mounted now, we can do continue ...
[2021/11/02 13:52:08] ventoy_clean_disk fd:5 size:124623257600
[2021/11/02 13:52:08] write disk at off:0 writelen:65536 datalen:65536
[2021/11/02 13:52:08] write disk at off:124623192064 writelen:65536 datalen:65536
[2021/11/02 13:52:08] read core.img.xz rc:0 len:455188
[2021/11/02 13:52:08] ventoy_unxz_stg1_img len:455188 rc:0
[2021/11/02 13:52:08] read disk.img.xz rc:0 len:12667212
[2021/11/02 13:52:09] ventoy_unxz_efipart_img len:12667212 rc:0 unxzlen:33554432
[2021/11/02 13:52:09] Fill MBR part table
[2021/11/02 13:52:09] Disk signature: 0x430075ce
[2021/11/02 13:52:09] no need to align with 4KB
[2021/11/02 13:52:09] ReservedSector: 0
[2021/11/02 13:52:09] Part1StartSector:2048 Part1SectorCount:243337216 Part2StartSector:243339264
[2021/11/02 13:52:09] Formatting part1 exFAT /dev/sdd ...
[0121/11/02 13:52:09] Creating...
[0121/11/02 13:52:09] Flushing...
[2021/11/02 13:52:10] Formatting part2 EFI ...
[2021/11/02 13:52:10] Formatting part2 EFI offset:124589703168 ...
[2021/11/02 13:52:10] VentoyProcSecureBoot 0 ...
[2021/11/02 13:52:10] Open ventoy efi file 0x635ae0
[2021/11/02 13:52:10] ventoy efi file size 1757184 ...
[2021/11/02 13:52:10] Now delete all efi files ...
[2021/11/02 13:52:10] Open bootx64 efi file 0x635ae0
[2021/11/02 13:52:12] Open ventoy efi file 0x635f30
[2021/11/02 13:52:12] ventoy efi file size 1183744 ...
[2021/11/02 13:52:12] Now delete all efi files ...
[2021/11/02 13:52:12] Open bootia32 efi file 0x635ae0
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:52:13] Writing legacy grub ...
[2021/11/02 13:52:13] Write MBR stage1 ...
[2021/11/02 13:52:13] lseek offset:512(512) writelen:1048064(1048064)
[2021/11/02 13:52:13] fsync data1...
[2021/11/02 13:52:16] Checking part2 efi data /dev/sdd ...
[2021/11/02 13:52:16] part2 data check failed i=0 len:1048576
[2021/11/02 13:52:16] efi part data check failed
[2021/11/02 13:53:14] ==================================================================================
[2021/11/02 13:53:14] ===== ventoy install /dev/sdd style:MBR secureboot:0 align4K:1 reserve:0 =========
[2021/11/02 13:53:14] ==================================================================================
[2021/11/02 13:53:14] disk is not mounted now, we can do the install ...
[2021/11/02 13:53:14] start install thread Lexar USB Flash Drive (USB) ...
[2021/11/02 13:53:14] ventoy_install_thread run ...
[2021/11/02 13:53:14] check disk sdd
[2021/11/02 13:53:14] disk is not mounted now, we can do continue ...
[2021/11/02 13:53:14] ventoy_clean_disk fd:5 size:124623257600
[2021/11/02 13:53:14] write disk at off:0 writelen:65536 datalen:65536
[2021/11/02 13:53:14] write disk at off:124623192064 writelen:65536 datalen:65536
[2021/11/02 13:53:14] read core.img.xz rc:0 len:455188
[2021/11/02 13:53:14] ventoy_unxz_stg1_img len:455188 rc:0
[2021/11/02 13:53:14] read disk.img.xz rc:0 len:12667212
[2021/11/02 13:53:15] ventoy_unxz_efipart_img len:12667212 rc:0 unxzlen:33554432
[2021/11/02 13:53:15] Fill MBR part table
[2021/11/02 13:53:15] Disk signature: 0x4af7bbdd
[2021/11/02 13:53:15] no need to align with 4KB
[2021/11/02 13:53:15] ReservedSector: 0
[2021/11/02 13:53:15] Part1StartSector:2048 Part1SectorCount:243337216 Part2StartSector:243339264
[2021/11/02 13:53:15] Formatting part1 exFAT /dev/sdd ...
[0121/11/02 13:53:15] Creating...
[0121/11/02 13:53:15] Flushing...
[2021/11/02 13:53:15] Formatting part2 EFI ...
[2021/11/02 13:53:15] Formatting part2 EFI offset:124589703168 ...
[2021/11/02 13:53:15] VentoyProcSecureBoot 0 ...
[2021/11/02 13:53:15] Open ventoy efi file 0x635ae0
[2021/11/02 13:53:15] ventoy efi file size 1757184 ...
[2021/11/02 13:53:15] Now delete all efi files ...
[2021/11/02 13:53:15] Open bootx64 efi file 0x635ae0
[2021/11/02 13:53:17] Open ventoy efi file 0x635f30
[2021/11/02 13:53:17] ventoy efi file size 1183744 ...
[2021/11/02 13:53:17] Now delete all efi files ...
[2021/11/02 13:53:17] Open bootia32 efi file 0x635ae0
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:18] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] write disk writelen:1048576 datalen:1048576 [ success ]
[2021/11/02 13:53:19] Writing legacy grub ...
[2021/11/02 13:53:19] Write MBR stage1 ...
[2021/11/02 13:53:19] lseek offset:512(512) writelen:1048064(1048064)
[2021/11/02 13:53:19] fsync data1...
[2021/11/02 13:53:22] Checking part2 efi data /dev/sdd ...
[2021/11/02 13:53:22] part2 data check failed i=0 len:1048576
[2021/11/02 13:53:22] efi part data check failed


Attached Files Thumbnail(s)
       

.txt   log.txt (Size: 14.52 KB / Downloads: 1)
Diamax
Reply
#10
When install, Ventoy will write some data to the USB stick and at the end of install, Ventoy will read back the data and compare with the data that just write before.

From the log I see that the data read back miss match with what just write in.

So I doubt that your USB stick may be fake or fauty or contains some bad physical sectors.
So I suggest you to use some tools to do a full test with the USB stick to confirm that whether there is some hardware problem with the USB stick.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)