+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use —— Ventoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: Edit ISO - no UEFI (/showthread.php?tid=438)
Edit ISO - no UEFI - Nierewa - 08-05-2020
Hi,
I love ventoy.
But there's a problem I have.
I made an Multiboot-USB Stick. With ventoy so easy.
But if I edit an ISO the error: "No bootfile found for UEFI! Maybe the image does not support X64 UEFI!" occured.
In this case it's Acronis 2019.
Inside iso is a file for Mac: AcronisTrueImage2019-17000.dmg
I delete this one to safe space. Now I bood end get the error.
Kaspersky rescue disc the same.
But I did the same thing with Acronis 2017 ago... this worked fine.
I use PowerISO or UltraIso to edit the isos.
Can someone help me with this?
Best regards
RE: Edit ISO - no UEFI - Nierewa - 08-10-2020
I made a new GPT ventoy stick with Ventoy-1.0.18_Modified_EN and Support for SecureBoot.
Now I get this error message:
ASSERT_EFI_ERROR (Status = Invalid Parameter)
ASSERT [Ventoy] /home/share/Ventoy/EDKII/edk2-edk2-stable201911/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c(813): !EFI_ERROR (Status)
No bootfile found for UEFI!
Maybe the image does not support X64 UEFI!
RE: Edit ISO - no UEFI - zeit - 08-10-2020
(08-05-2020, 11:09 AM)Nierewa Wrote: Hi,
I love ventoy.
But there's a problem I have.
I made an Multiboot-USB Stick. With ventoy so easy.
But if I edit an ISO the error: "No bootfile found for UEFI! Maybe the image does not support X64 UEFI!" occured.
In this case it's Acronis 2019.
Inside iso is a file for Mac: AcronisTrueImage2019-17000.dmg
I delete this one to safe space. Now I bood end get the error.
Kaspersky rescue disc the same.
But I did the same thing with Acronis 2017 ago... this worked fine.
I use PowerISO or UltraIso to edit the isos.
Can someone help me with this?
Best regards
- Kaspersky Rescue DiskFor krd.iso, grub signature check was enabled in UEFI mode by default. Ventoy must do some hook to avoid "kernel.dat not found" error, but the hook will be denied by the check.So in UEFI mode, after the kaspersky boot menu was shown, you need to run set check_signatures=no in the grub shell before boot.
RE: Edit ISO - no UEFI - awengers44 - 08-10-2020
(08-10-2020, 11:55 AM)Nierewa Wrote: I made a new GPT ventoy stick with Ventoy-1.0.18_Modified_EN and Support for SecureBoot.Modifiye ventoy çalışmayı yüklerken sisteminizde çalışan antivirüs veya defender usb sürücünüze erişimi engelleyip dosyaların yüklenmesini engellemiş olabilir ! önce dosyaların usb aygıtınıza yüklendiğine emin olun.
Now I get this error message:
ASSERT_EFI_ERROR (Status = Invalid Parameter)
ASSERT [Ventoy] /home/share/Ventoy/EDKII/edk2-edk2-stable201911/MdePkg/Library/UefiMemoryAllocationLib/MemoryAllocationLib.c(813): !EFI_ERROR (Status)
No bootfile found for UEFI!
Maybe the image does not support X64 UEFI!
Dosyalar hatasız yüklenmişse hata aldığınız iso dosyasının adı nedir ? ve müdahele edilmiş bir iso dosyasımı bilmiyoruz.
Ventoy tarafından desteklenmeyen veya standart uefi kurulumu olmayan iso dosyaları için F6 kısa yol tuşuna basıp grubfm çalıştırıp iso dosyasını yüklemek için alternatif yükleme seçeneklerini deneyin ve ventoy,da F1 memdisk metodununu kullanarak ayrıca test edin.
Burada yazmak yerine paylaşım yapılan sitede ventoy konusunda sorunu yazabilirsiniz, bildiğim bir konu ise yardımcı olmaya çalışırım.
RE: Edit ISO - no UEFI - Nierewa - 08-18-2020
Sorry, I can't speak turkish and the Google translater shows a mess.
May you write in english please?