Ventoy Forums
problems installing windows 11 with the unattended file - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: iVentoy General Use —— iVentoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=7)
+--- Forum: iVentoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=8)
+--- Thread: problems installing windows 11 with the unattended file (/showthread.php?tid=3185)



problems installing windows 11 with the unattended file - xeno - 04-16-2026

hello everyone, I'm trying to install Windows 11 via Iventoy with a response file on a Dell laptop in UEFI mode, the disks seem to crash and the installation begins, but an error is written at 55% when installing Windows 11. My unattended.xml:

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urnConfusedchemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>ru-RU</UILanguage>
            </SetupUILanguage>
            <InputLocale>ru-RU</InputLocale>
            <UILanguage>ru-RU</UILanguage>
            <SystemLocale>ru-RU</SystemLocale>
            <UserLocale>ru-RU</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>               
<Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Type>EFI</Type>
                            <!-- <Type>Primary</Type> -->
                            <Size>100</Size>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>2</Order>
                            <Type>MSR</Type>
                            <Size>16</Size>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>3</Order>
                            <Type>Primary</Type>
                            <Extend>true</Extend>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Order>1</Order>
                            <PartitionId>1</PartitionId>
                            <Format>FAT32</Format>
                            <Label>System</Label>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>3</Order>
                            <PartitionId>3</PartitionId>
                            <Format>NTFS</Format>
                            <Label>Windows</Label>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>$$VT_WINDOWS_DISK_MAX_SIZE$$</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
<ImageInstall>
                <OSImage>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Value>6</Value>
                            <Key>/IMAGE/INDEX</Key>
                        </MetaData>
                    </InstallFrom>
                    <InstallTo>
                        <DiskID>$$VT_WINDOWS_DISK_MAX_SIZE$$</DiskID>
                        <PartitionID>3</PartitionID>
                    </InstallTo>
                </OSImage>
            </ImageInstall>
           
            <UserData>
                <AcceptEula>true</AcceptEula>
                <FullName>-</FullName>
                <Organization>-</Organization>
              <!--  $$VT_MAC_COLON_LOWER$$ $$VT_SERVER_IP$$  $$VT_LOCAL_IP$$/$$VT_NET_MASK_LEN$$
                $$VT_IMG_PMD5_HTTP_URL$$ -->
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RegisteredOrganization>-</RegisteredOrganization>
        </component>       
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
              <HideEULAPage>true</HideEULAPage>
              <NetworkLocation>Work</NetworkLocation>
              <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
            <AutoLogon>
                <Enabled>true</Enabled>
                <LogonCount>2</LogonCount>
                <Username>administrator</Username>
                <Password>
                    <Value>123456</Value>
                    <PlainText>true</PlainText>
                </Password>
            </AutoLogon>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>123456</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>public</Value>
                            <PlainText>true</PlainText>
                        </Password>
                        <DisplayName>public</DisplayName>
                        <Group>Administrators</Group>
                        <Name>public</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>-</RegisteredOrganization>
            <RegisteredOwner>-</RegisteredOwner>
        </component>       
    </settings>
</unattend>

Don't pay attention to the smiley face in unattended.xml

(04-16-2026, 01:26 PM)xeno Wrote: hello everyone, I'm trying to install Windows 11 via Iventoy with a response file on a Dell laptop in UEFI mode, the disks seem to crash and the installation begins, but an error is written at 55% when installing Windows 11. I also want to add that I have the achi drive type in my bios. My unattended.xml:

<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urnConfusedchemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SetupUILanguage>
                <UILanguage>ru-RU</UILanguage>
            </SetupUILanguage>
            <InputLocale>ru-RU</InputLocale>
            <UILanguage>ru-RU</UILanguage>
            <SystemLocale>ru-RU</SystemLocale>
            <UserLocale>ru-RU</UserLocale>
        </component>
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DiskConfiguration>               
<Disk wcm:action="add">
                    <CreatePartitions>
                        <CreatePartition wcm:action="add">
                            <Order>1</Order>
                            <Type>EFI</Type>
                            <!-- <Type>Primary</Type> -->
                            <Size>100</Size>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>2</Order>
                            <Type>MSR</Type>
                            <Size>16</Size>
                        </CreatePartition>
                        <CreatePartition wcm:action="add">
                            <Order>3</Order>
                            <Type>Primary</Type>
                            <Extend>true</Extend>
                        </CreatePartition>
                    </CreatePartitions>
                    <ModifyPartitions>
                        <ModifyPartition wcm:action="add">
                            <Order>1</Order>
                            <PartitionId>1</PartitionId>
                            <Format>FAT32</Format>
                            <Label>System</Label>
                        </ModifyPartition>
                        <ModifyPartition wcm:action="add">
                            <Order>3</Order>
                            <PartitionId>3</PartitionId>
                            <Format>NTFS</Format>
                            <Label>Windows</Label>
                        </ModifyPartition>
                    </ModifyPartitions>
                    <DiskID>$$VT_WINDOWS_DISK_MAX_SIZE$$</DiskID>
                    <WillWipeDisk>true</WillWipeDisk>
                </Disk>
            </DiskConfiguration>
<ImageInstall>
                <OSImage>
                    <InstallFrom>
                        <MetaData wcm:action="add">
                            <Value>6</Value>
                            <Key>/IMAGE/INDEX</Key>
                        </MetaData>
                    </InstallFrom>
                    <InstallTo>
                        <DiskID>$$VT_WINDOWS_DISK_MAX_SIZE$$</DiskID>
                        <PartitionID>3</PartitionID>
                    </InstallTo>
                </OSImage>
            </ImageInstall>
           
            <UserData>
                <AcceptEula>true</AcceptEula>
                <FullName>-</FullName>
                <Organization>-</Organization>
              <!--  $$VT_MAC_COLON_LOWER$$ $$VT_SERVER_IP$$  $$VT_LOCAL_IP$$/$$VT_NET_MASK_LEN$$
                $$VT_IMG_PMD5_HTTP_URL$$ -->
            </UserData>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RegisteredOrganization>-</RegisteredOrganization>
        </component>       
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
              <HideEULAPage>true</HideEULAPage>
              <NetworkLocation>Work</NetworkLocation>
              <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
            <AutoLogon>
                <Enabled>true</Enabled>
                <LogonCount>2</LogonCount>
                <Username>administrator</Username>
                <Password>
                    <Value>123456</Value>
                    <PlainText>true</PlainText>
                </Password>
            </AutoLogon>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>123456</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>public</Value>
                            <PlainText>true</PlainText>
                        </Password>
                        <DisplayName>public</DisplayName>
                        <Group>Administrators</Group>
                        <Name>public</Name>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
            <RegisteredOrganization>-</RegisteredOrganization>
            <RegisteredOwner>-</RegisteredOwner>
        </component>       
    </settings>
</unattend>

Don't pay attention to the smiley face in unattended.xml



RE: problems installing windows 11 with the unattended file - roy - 04-23-2026

It's probably the $$VT_WINDOWS_DISK_MAX_SIZE$$ that did not convert to an actual ID. In the iVentoy documentation it tells you to use "unattended.xml" as file name, but later in the example they use "unattend.xml". Windows also expects "unattend.xml". Try renaming your xml file.