+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: iVentoy General Use —— iVentoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=7)
+--- Forum: iVentoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=8)
+--- Thread: screen garble problem when enter windows install (/showthread.php?tid=2922)
screen garble problem when enter windows install - jjyoo0308 - 07-16-2024
First of all, please understand that the grammar is not natural as we used a translator. I was experiencing a dhcp problem, but I solved the problem through Googling, and now I am suffering from a screen garble problem. I've tried every possible resolution, but nothing works. Of course, there is no problem when booting the iso file from USB. Looking at past threads on the forum, I see several people complaining about this issue. Why hasn't the bug been resolved yet?
RE: screen garble problem when enter windows install - brian-LOT - 07-25-2024
Hello there,
I had the same issue, but not when i was testing with virtual machines, only when i went with physical hardware.
My solution was to change the resolution settings to "800x600"
-> go to "Configuration" and in the "boot configuration" you will find "boot resolution"
Hope it'll help you
RE: screen garble problem when enter windows install - jjyoo0308 - 07-29-2024
(07-25-2024, 01:23 PM)brian-LOT Wrote: Hello there,I also have no problems with vmware esxi. As you said, the same error occurs at all resolutions, including 800x600 resolution.
I had the same issue, but not when i was testing with virtual machines, only when i went with physical hardware.
My solution was to change the resolution settings to "800x600"
-> go to "Configuration" and in the "boot configuration" you will find "boot resolution"
Hope it'll help you