Ventoy Forums
Image is torn into lines and stretched significantly, on Windows Boot. - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: iVentoy General Use —— iVentoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=7)
+--- Forum: iVentoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=8)
+--- Thread: Image is torn into lines and stretched significantly, on Windows Boot. (/showthread.php?tid=2830)

Image is torn into lines and stretched significantly, on Windows Boot. - Ramset - 03-28-2024

Hello everyone,  I have the problem when I want to start a Windows image with iventoy that my display is incorrect. The image is torn into lines and stretched significantly. See pictures..  Ubuntu, however, starts without any problems.  I tested Windows 10 and Windows 11.  Has anyone seen this before? Can anyone help here?

Thank you

Ramset

RE: Image is torn into lines and stretched significantly, on Windows Boot. - sklerder - 03-28-2024

Hi Ramset.
Yes, this rather frequent. Maybe you can avoid it by trying resolutions before launching the image ...
Number of us are expecting a significant amelioration in the next version.

That said, if you are working in unattended mode for Windows, it should work correctly if your unattended.xml script is OK.

RE: Image is torn into lines and stretched significantly, on Windows Boot. - Ramset - 03-28-2024

Okay for everyone who had this problem... its an Resolution Problem. I had an 1440P Screen but the resolution who worked for me is 1024x768. I hope you find yours Smile

Good Luck.

RE: Image is torn into lines and stretched significantly, on Windows Boot. - sklerder - 03-29-2024

Cool

RE: Image is torn into lines and stretched significantly, on Windows Boot. - jeffshead - 04-19-2024

(03-28-2024, 05:05 PM)Ramset Wrote: Okay for everyone who had this problem... its an Resolution Problem. I had an 1440P Screen but the resolution who worked for me is 1024x768. I hope you find yours Smile

Good Luck.

I have a Dell 7400 2-in-1 that I'm testing and I get the following screen when PXE booting Windows ISO's:
[Image: oQdulmS.jpeg]

This is what the screen looks like if I boot the same ISO from a USB drive:
[Image: w1D9a3X.jpeg]

So how do I fix this?

I tried adding the following auto install script but it doesn't seem to make any difference:

Code:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="windowsPE">
        <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <Display>
                <ColorDepth>32</ColorDepth>
                <HorizontalResolution>1024</HorizontalResolution>
                <RefreshRate>60</RefreshRate>
                <VerticalResolution>768</VerticalResolution>
            </Display>
            <RunSynchronous>
                <RunSynchronousCommand wcm:action="add">
                    <Order>1</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassTPMCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>2</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassSecureBootCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>3</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassRAMCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassCPUCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>4</Order>
                    <Path>reg add HKLM\System\Setup\LabConfig /v BypassStorageCheck /t reg_dword /d 0x00000001 /f</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
            <UserData>
                <ProductKey>
                    <Key></Key>
                </ProductKey>
            </UserData>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
            <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
        </component>
    </settings>
</unattend>


UPDATE:

https://github.com/ventoy/PXE/issues/11

So it seems this is an ongoing issue that still hasn't been or can't be resolved???

Thanks for adding the Screen Resolution option to the Tools menu as a workaround :-)
[Image: 0JiDIwM.jpeg]

So the question still remains... Why does booting the same ISO's from USB always work but when PXE booting with iVentoy you have to manually set the screen resolution?

RE: Image is torn into lines and stretched significantly, on Windows Boot. - sklerder - 04-19-2024

Hi !
Maybe you could solve the issue by using an external screen (HDMI, DVI, VGA) with a known resolution.

Alas, screen resolution at boot time is a really annoying problem, and is not simple to solve (even Microsoft seems to be impacted with this problem, the difference of comportment between W10/W11, MBR mode /UEFI mode and other configurations tend to prove it).