+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use —— Ventoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: SeaTools image does not boot (/showthread.php?tid=2387)
SeaTools image does not boot - eyal - 02-26-2023
I now use ventoy 1.88.
I downloaded "SeaTools Bootable"
USBbootSetup-SeaToolsBootable.zip
from
https://www.seagate.com/au/en/support/downloads/seatools/
Ran it and created a USB disk.
The disk boots and works as expected. I think it is a Core Linux using busybox.
I now read the disk ('dd' under linux) and copied the image to the ventoy disk where I have a number of images. For example a fedora 37 CD boots fine as others do.
This SeaTools image does not boot properly. It actually starts to boot but then drops into a shell prompt.
It does not matter if I enable or not UEFI boot.
I captured the boot logs (dmesg) of a good boot and a failed boot, however since this is a standard package it should be easy to reproduce. I hope.