Ventoy Forums
[SOLVED] Solus 4.3 does not boot under 1.0.62 - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: [SOLVED] Solus 4.3 does not boot under 1.0.62 (/showthread.php?tid=1910)



[SOLVED] Solus 4.3 does not boot under 1.0.62 - cotton - 12-06-2021

Hi,

Testing of the current release (1.0.62) with Solus Budgie 4.3 resulted in a blank screen and an eventual timeout script being initialised ending in a text prompt. 
Pressing the enter key several times and waiting for a change was unsuccessful. 
Same result observed for both MBR and GPT.

Surprised, as I'd read that Solus 4.2 had been tested successfully with Ventoy, I tried that release but it failed in the same way.

After discussion on the Solus forum revealed that the successful testing had been done using 1.0.41, I installed that and it worked first time!

I then updated to 1.0.62 which again led to the failure described above.

TLDR: It appears there is some regression from 1.0.41 to 1.0.62 regarding Solus but I've not tested other versions to identify when this occurred.

Not sure if it's a known issue but couldn't find any other bug report.

Please fix.


RE: Solus 4.3 does not boot under 1.0.62 - zeit - 12-06-2021

Try this: Ctrl+r and run the iso.


RE: Solus 4.3 does not boot under 1.0.62 - cotton - 12-06-2021

(12-06-2021, 05:40 PM)zeit Wrote: Try this: Ctrl+r and run the iso.
No, it still failed.


RE: Solus 4.3 does not boot under 1.0.62 - longpanda - 12-07-2021

Did it drop into a shell finally?
If so, run some commands and send me the log:

cat /ventoy/log
blkid


RE: Solus 4.3 does not boot under 1.0.62 - longpanda - 12-07-2021

I download Solus-4.3-Budgie.iso and it boot OK in my Laptop (ThinkPad T420).


RE: Solus 4.3 does not boot under 1.0.62 - zeit - 12-07-2021

Solus-4.3-Budgie.iso , Lenovo TP T430 Legacy -ok , UEFI -no, Ventoy 1.0.62 release.


RE: Solus 4.3 does not boot under 1.0.62 - longpanda - 12-08-2021

Try this CI release:
https://github.com/ventoy/Ventoy/actions/runs/1552440057
https://www.ventoy.net/en/doc_github_ci.html


RE: Solus 4.3 does not boot under 1.0.62 - zeit - 12-08-2021

Solus-4.3-Budgie.iso , Lenovo TP T430 Legacy -ok , UEFI -ok - CI release.


RE: Solus 4.3 does not boot under 1.0.62 - cotton - 12-09-2021

(12-08-2021, 05:35 AM)longpanda Wrote: Try this CI release:
https://github.com/ventoy/Ventoy/actions/runs/1552440057
https://www.ventoy.net/en/doc_github_ci.html
Excellent, thank you. That worked.

Solus-4.3-Budgie.iso , Dell Lattitude 5300 Legacy -ok , UEFI -ok - CI release.


RE: Solus 4.3 does not boot under 1.0.62 - longpanda - 12-10-2021

Good.
This will be included in the next release.