Ventoy Forums
无法识别硬盘 - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: 无法识别硬盘 (/showthread.php?tid=1458)



无法识别硬盘 - tianyou888 - 12-04-2020

版主,你好!
       我在组装台式机装win7x64和win10x64系统时,Win10有时候点击ISO文件后进去了会黑屏,有时候能正常安装成功,win7就一直不能安装成功,提示缺少驱动器设备驱动程序,win7版是你测试过的“cn_windows_7_ultimate_with_sp1_x64_dvd_u_677408.iso”,Win10版本为“cn_windows_10_business_editions_version_1909_updated_jan_2020_x64_dvd_b3e1f3a6.iso”。请看附件切图




RE: 无法识别硬盘 - longpanda - 12-04-2020

Windows 10黑屏暂时不知道什么原因。
Windows 7 极有可能是因为这个ISO里面缺少USB3.0驱动的原因,你是不是用的USB3.0的接口?

另外,Windows 10黑屏,你可以把启动模式改成 UEFI 模式试试(你当前是Legacy+UEFI模式)


RE: 无法识别硬盘 - tianyou888 - 12-05-2020

谢谢版竹的指点,win10后面我改下模式再试试,win7我U盘是2.0的,电脑接口标注2.0/3.0通用。


RE: 无法识别硬盘 - Steve2926 - 12-05-2020

Win 7 does not have modern USB 2 or USB 3 drivers. It only works with old USB 2 systems.
It does not have drivers for modern chipsets even if they are USB 2.


RE: 无法识别硬盘 - tianyou888 - 12-06-2020

(12-05-2020, 12:54 PM)Steve2926 Wrote: Win 7 does not have modern USB 2 or USB 3 drivers. It only works with old USB 2 systems.
It does not have drivers for modern chipsets even if they are USB 2.
Thank you. I see. I'll try an old USB 2.


RE: 无法识别硬盘 - mr.neeo - 12-06-2020

Close all dialog boxes and move on

[Image: httpatomoreillycomsourceoreillyimages325237.png.jpg]

after it, change USB port preferable 2.0, and insert the USB again. try again. so hope it will help you.


RE: 无法识别硬盘 - tianyou888 - 12-07-2020

(12-06-2020, 12:08 PM)mr.neeo Wrote: Close all dialog boxes and move on

[Image: httpatomoreillycomsourceoreillyimages325237.png.jpg]

after it, change USB port preferable 2.0, and insert the USB again. try again. so hope it will help you.

Sorry, I don't understand, close all dialogs, how do I continue to install


RE: 无法识别硬盘 - mr.neeo - 12-07-2020

(12-07-2020, 04:51 AM)tianyou888 Wrote:
(12-06-2020, 12:08 PM)mr.neeo Wrote: Close all dialog boxes and move on

[Image: httpatomoreillycomsourceoreillyimages325237.png.jpg]

after it, change USB port preferable 2.0, and insert the USB again. try again. so hope it will help you.

Sorry, I don't understand, close all dialogs, how do I continue to install
Mean close all upto the shown picture, and change USB port, and then click on Next button


RE: 无法识别硬盘 - tianyou888 - 12-07-2020

I've tried, the same result, but thanks for your help


RE: 无法识别硬盘 - tianyou888 - 12-28-2020

(12-04-2020, 09:32 AM)longpanda Wrote: Windows 10黑屏暂时不知道什么原因。
Windows 7 极有可能是因为这个ISO里面缺少USB3.0驱动的原因,你是不是用的USB3.0的接口?

另外,Windows 10黑屏,你可以把启动模式改成  UEFI 模式试试(你当前是Legacy+UEFI模式)
终于抽空去折腾了一下,win7正如斑竹锁说的问题,ISO文件缺少USB3.0驱动的问题,应该还缺少USB2.0的驱动,因为我当时2.0和3.0的接口都出现同样问题,解决办法是下载驱动注入工具,我下载了“WindowsImageTool”这个工具,把win7-ISO文件注入USB驱动后,安装一切正常。win10黑屏的问题,更改模式依然也会偶尔出现,这个应该是电脑的问题。感谢斑竹发明如此强大的工具!之所以过了不少时间还回复,是希望碰到同样问题的朋友能够看到。