Tested following .iso's 1.0.13

Tested following .iso's 1.0.13 - Printable Version

+- Ventoy Forums (https://forums.ventoy.net)
+-- Forum: Ventoy General Use —— Ventoy 使用交流 (https://forums.ventoy.net/forumdisplay.php?fid=1)
+--- Forum: Ventoy Discussion Forum (https://forums.ventoy.net/forumdisplay.php?fid=2)
+--- Thread: Tested following .iso's 1.0.13 (/showthread.php?tid=121)

Tested following .iso's 1.0.13 - tlmiller76 - 06-20-2020

Just prepping a thread. With the newer 1.0.13, I'll be testing the following images. Test hardware will be a Dell Latitude 3500 (shouldn't matter, but 8265u/16GB/1TB NVMe/GB Eth/Wifi 5 (9260AC))with no legacy compatibility turned on (full UEFI). I realize some are duplicates that have already been tested, but I just copied all my current iso's over to the USB...

anarchy-1.2.1-x86_64.iso
STILL WORKING

debian-10.4.0-amd64-netinst.iso
STILL WORKING

endeavouros-2020.05.08-x86_64.iso
WORKING

Fedora-Workstation-Live-x86_64-32-1.6.iso
WORKING

FuryBSD-12.1-KDE-2020042001.iso

GhostBSD-20.04.1.iso

gparted-live-1.0.0-2-amd64.iso
WORKING

Mageia-7.1-Live-Plasma-x86_64.iso
Hangs at Mageia splash screen, cannot get to console to see where it hung

OpenMandrivaLx.4.1-2020.05-plasma.x86_64.iso
WORKING

q4os-3.11-x64-tde.r1.iso

ROSA.FRESH.PLASMA5.R11.x86_64.uefi.iso

sparkylinux-5.11-x86_64-lxqt.iso

void-live-x86_64-20191109.iso

RE: Tested following .iso's 1.0.13 - AgentX - 06-20-2020

Quote:Fedora-Workstation-Live-x86_64-32-1.6.iso

WORKING

Made a thread about thids not booting from Ventoy 1.12, will upgrade to 1.13, try again and let you know the results.

RE: Tested following .iso's 1.0.13 - ascrounch - 06-29-2020

won't works with "Malekal liveCD" (1 591 691 264 octets) and Ventoy 1.0.13

Malekal is based on projets Win7PESE and Win10PESE

official link is : https://mega.nz/file/Z5ZQ3Q4S#VUvBTTXBczkyVvczk-bj4LUljl2CrK2cRQ_i7SXYvGY

...it works very well with rufus (and others)