Ventoy Forums

Full Version: [SOLVED] I can't update to version 1.0.74
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Good morning,

i have an m.2 with 2 tb and reserved additional storage space when installing ventoy 1.0.73.

Unfortunately, I found out that I can't update to version 1.0.74 because the button is grayed out.

in a test with a usb stick and no reserved memory, i can update to 1.0.74 without any problems.



attached is a section of the log file.



Code:
[2022/05/08 07:16:52.915] =========== Disk6 GPT Partition 1 ============
[2022/05/08 07:16:52.915] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/08 07:16:52.915] PartTbl.PartGuid = {e0e72e23-5e9a-49cc-b42b-73da8fcaa9a9}
[2022/05/08 07:16:52.915] PartTbl.StartLBA = 2048
[2022/05/08 07:16:52.915] PartTbl.LastLBA = 249530503
[2022/05/08 07:16:52.915] PartTbl.Attribute = 0x0
[2022/05/08 07:16:52.915] PartTbl.Name = Ve
[2022/05/08 07:16:52.915] =========== Disk6 GPT Partition 2 ============
[2022/05/08 07:16:52.915] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/08 07:16:52.915] PartTbl.PartGuid = {b08ed53f-e697-4f6e-9a55-fd44fb6a9642}
[2022/05/08 07:16:52.915] PartTbl.StartLBA = 249530504
[2022/05/08 07:16:52.915] PartTbl.LastLBA = 249596039
[2022/05/08 07:16:52.915] PartTbl.Attribute = 0xc000000000000001
[2022/05/08 07:16:52.915] PartTbl.Name = VT
[2022/05/08 07:16:52.915] =========== Disk6 GPT Partition 3 ============
[2022/05/08 07:16:52.915] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/08 07:16:52.915] PartTbl.PartGuid = {dbc6dcac-4d16-405a-989b-2567505c2ff1}
[2022/05/08 07:16:52.915] PartTbl.StartLBA = 249597952
[2022/05/08 07:16:52.915] PartTbl.LastLBA = 3403517951
[2022/05/08 07:16:52.915] PartTbl.Attribute = 0x0
[2022/05/08 07:16:52.915] PartTbl.Name = Ba
[2022/05/08 07:16:52.915] =========== Disk6 GPT Partition 4 ============
[2022/05/08 07:16:52.915] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/08 07:16:52.915] PartTbl.PartGuid = {c9babd39-8fae-4202-b2c1-73509d0c505b}
[2022/05/08 07:16:52.915] PartTbl.StartLBA = 3403517952
[2022/05/08 07:16:52.915] PartTbl.LastLBA = 3907026943
[2022/05/08 07:16:52.915] PartTbl.Attribute = 0x0
[2022/05/08 07:16:52.915] PartTbl.Name = Ba
[2022/05/08 07:16:52.915] Invalid ventoy efi part name <VT>
[2022/05/08 07:16:52.915] < Hitachi HDS721050CLA362> is filtered for not USB type.
[2022/05/08 07:16:52.915] < Hitachi HDS723020BLA642> is filtered for not USB type.
[2022/05/08 07:16:52.915] < Samsung SSD 850 PRO 256GB> is filtered for not USB type.
[2022/05/08 07:16:52.915] < Samsung SSD 870 EVO 1TB> is filtered for not USB type.
[2022/05/08 07:16:52.962] Load languages from json file ...
[2022/05/08 07:16:52.962] language json file len:216291 json parse:0
[2022/05/08 07:16:52.962] Total 46 languages ...
[2022/05/08 07:16:52.999] Not ventoy disk, clear secure boot option
[2022/05/08 07:16:58.097] Not ventoy disk, clear secure boot option


Greetings Flinkesocke
The partition 1/2 name should be Ventoy/VTOYEFI as follows after install Ventoy

[2022/05/09 10:08:22.660] =========== Disk4 GPT Partition 1 ============
[2022/05/09 10:08:22.676] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/09 10:08:22.676] PartTbl.PartGuid = {3e0a4adb-8c6e-4aa6-9a39-356047a36398}
[2022/05/09 10:08:22.691] PartTbl.StartLBA = 2048
[2022/05/09 10:08:22.691] PartTbl.LastLBA = 22265815
[2022/05/09 10:08:22.691] PartTbl.Attribute = 0x0
[2022/05/09 10:08:22.707] PartTbl.Name = Ventoy
[2022/05/09 10:08:22.707] =========== Disk4 GPT Partition 2 ============
[2022/05/09 10:08:22.723] PartTbl.PartType = {ebd0a0a2-b9e5-4433-87c0-68b6b72699c7}
[2022/05/09 10:08:22.723] PartTbl.PartGuid = {cda07375-8248-44c1-8241-98d73dab8026}
[2022/05/09 10:08:22.738] PartTbl.StartLBA = 22265816
[2022/05/09 10:08:22.738] PartTbl.LastLBA = 22331351
[2022/05/09 10:08:22.754] PartTbl.Attribute = 0xc000000000000001
[2022/05/09 10:08:22.754] PartTbl.Name = VTOYEFI
Hello,
thanks for the hint.
I had my m.2 created again with ventoy 2disk and it worked. the correct values are now in the log file in the parttbl.
Thanks for your help