版主，你好！
我在组装台式机装win7x64和win10x64系统时，Win10有时候点击ISO文件后进去了会黑屏，有时候能正常安装成功，win7就一直不能安装成功，提示缺少驱动器设备驱动程序，win7版是你测试过的“cn_windows_7_ultimate_with_sp1_x64_dvd_u_677408.iso”，Win10版本为“cn_windows_10_business_editions_version_1909_updated_jan_2020_x64_dvd_b3e1f3a6.iso”。请看附件切图
。
Windows 10黑屏暂时不知道什么原因。
Windows 7 极有可能是因为这个ISO里面缺少USB3.0驱动的原因，你是不是用的USB3.0的接口？
另外，Windows 10黑屏，你可以把启动模式改成 UEFI 模式试试（你当前是Legacy+UEFI模式）
谢谢版竹的指点，win10后面我改下模式再试试，win7我U盘是2.0的，电脑接口标注2.0/3.0通用。
Win 7 does not have modern USB 2 or USB 3 drivers. It only works with old USB 2 systems.
It does not have drivers for modern chipsets even if they are USB 2.
(12-05-2020, 12:54 PM)Steve2926 Wrote: [ -> ]Win 7 does not have modern USB 2 or USB 3 drivers. It only works with old USB 2 systems.
It does not have drivers for modern chipsets even if they are USB 2.
Thank you. I see. I'll try an old USB 2.
Close all dialog boxes and move on
![[Image: httpatomoreillycomsourceoreillyimages325237.png.jpg]](https://www.oreilly.com/library/view/windows-7-up/9780596806422/httpatomoreillycomsourceoreillyimages325237.png.jpg)
after it, change USB port preferable 2.0, and insert the
USB again. try again. so hope it will help you.
(12-06-2020, 12:08 PM)mr.neeo Wrote: [ -> ]Close all dialog boxes and move on
after it, change USB port preferable 2.0, and insert the USB again. try again. so hope it will help you.
Sorry, I don't understand, close all dialogs, how do I continue to install
(12-07-2020, 04:51 AM)tianyou888 Wrote: [ -> ] (12-06-2020, 12:08 PM)mr.neeo Wrote: [ -> ]Close all dialog boxes and move on
after it, change USB port preferable 2.0, and insert the USB again. try again. so hope it will help you.
Sorry, I don't understand, close all dialogs, how do I continue to install
Mean close all upto the shown picture, and change USB port, and then click on Next button
I've tried, the same result, but thanks for your help
(12-04-2020, 09:32 AM)longpanda Wrote: [ -> ]Windows 10黑屏暂时不知道什么原因。
Windows 7 极有可能是因为这个ISO里面缺少USB3.0驱动的原因，你是不是用的USB3.0的接口？
另外，Windows 10黑屏，你可以把启动模式改成 UEFI 模式试试（你当前是Legacy+UEFI模式）
终于抽空去折腾了一下，win7正如斑竹锁说的问题，ISO文件缺少USB3.0驱动的问题，应该还缺少USB2.0的驱动，因为我当时2.0和3.0的接口都出现同样问题，解决办法是下载驱动注入工具，我下载了“WindowsImageTool”这个工具，把win7-ISO文件注入USB驱动后，安装一切正常。win10黑屏的问题，更改模式依然也会偶尔出现，这个应该是电脑的问题。感谢斑竹发明如此强大的工具！之所以过了不少时间还回复，是希望碰到同样问题的朋友能够看到。